[asterisk-users] Hash Dial Pattern Problems

David Nickel dnickel at gmail.com
Wed May 5 17:28:40 CDT 2010


It doesnt seem to like the _X. . What is this suppose represent?
Thanks


On Wed, May 5, 2010 at 5:53 PM, Danny Nicholas <danny at debsinc.com> wrote:

>  From 1.2 CLI, do “dialplan show _X. at default – this will tell you if your
> expected context is valid (may not work on 1.2, I started this ride at 1.4
> and therefore have no backward knowledge).
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David Nickel
> *Sent:* Wednesday, May 05, 2010 4:41 PM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Hash Dial Pattern Problems
>
>
>
> Your interpretation is right own....very weird problem.  The problem is
> when i dial #551212 there is absolutely no activity in the CLI. It is almost
> like there is a conflict somewhere.
>
> On Wed, May 5, 2010 at 12:40 PM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Ok.  I’m confused.  I was interpreting what you wrote to say that you are
> doing this:
>
>    1. pick up sip phone attached to pbx1 (1.2 box)
>    2. dial #5551212
>    3. command dial(iax2/trunk/5551212,30,r) gets executed on 1.2 box
>    4. 1.4 box should fall into _XXXXXXX and do DAHDI dial?
>
>
>
> If this is correct, where is the IAX command in your CLI output.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David Nickel
> *Sent:* Wednesday, May 05, 2010 10:11 AM
>
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Hash Dial Pattern Problems
>
>
>
> I am on the 1.2 box and see nothing with the verbose cranked up. I do see
> the following when tailing the asterisk full log during the calls:
>
> May  5 11:09:46 DEBUG[26538] chan_sip.c: Setting NAT on RTP to 0
>
> May  5 11:09:46 DEBUG[26538] chan_sip.c: Checking SIP call limits for
> device 3000
>
> May  5 11:09:46 DEBUG[26538] chan_sip.c: Stopping retransmission on
> 'Njg3MjI5N2IzNDk3NWYxZTMzMzFmMzEwNzc2ZDE1NTE.' of Response 2: Match Found
>
>
>
>
>
> On Wed, May 5, 2010 at 10:39 AM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Ok – you have to be getting something or you wouldn’t get that message.
> You are looking at CLI on the 1.2 or 1.4 box? If you’re looking at the 1.4
> side, you won’t see anything until a connection is made (although you should
> see some kind of credential reject or something??)
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David Nickel
> *Sent:* Wednesday, May 05, 2010 9:31 AM
>
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Hash Dial Pattern Problems
>
>
>
> Nothing..goes directly to "The person you are calling is unavailable".
>
> On Wed, May 5, 2010 at 9:46 AM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Set verbose to 5 and see if you get a CLI output.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David Nickel
> *Sent:* Wednesday, May 05, 2010 8:39 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Hash Dial Pattern Problems
>
>
>
> I am sorry it is not 1.6 but 1.4.30 (argh.. to many boxes)
>
> The other box is running 1.2.1
>
> Thanks,
>
> David
>
> On Wed, May 5, 2010 at 9:28 AM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Which 1.6 are you running?  I dropped my 1.6.1.6 back to 1.4.30 because my
> other 2 1.4.30 boxes wouldn’t talk to it properly.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David Nickel
> *Sent:* Wednesday, May 05, 2010 8:23 AM
> *To:* asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] Hash Dial Pattern Problems
>
>
>
> I have two Asterisk boxe. One is running 1.6 and the other 1.2
>
> The users on the 1.2 system press # plus a local 7 digit number to place
> local calls through the trunk to the 1.6 box.
>
> For some reason this dial pattern fails right away with "unavailable".
> There is no activity in the CLI. Other patterns for the trunk work just
> fine.
>
> Dial pattern:
> #|. or #|NXXXXXX
>
> exten => _#.,1,Dial(IAX2/trunk/${EXTEN:1},30,r)
> exten => _#.,2,Congestion
>
> I have been beating my end with the problem for three days. Any suggestions
> would be much appreciated.
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100505/0a483b82/attachment-0001.htm 


More information about the asterisk-users mailing list