[asterisk-users] Trying to configure xorcom on Suse 11

[Tzafrir Cohen]

On Sun, Mar 28, 2010 at 09:16:48PM -0500, Tim Panton wrote:
> 
> On 28 Mar 2010, at 10:13, Tzafrir Cohen wrote:
> 
> > On Sat, Mar 27, 2010 at 04:48:41PM -0500, Tim Panton wrote:
> >> I'm having trouble getting a xorcom set up.
> >> 
> >> A large part of the problem is that the box is a _long_ way away and 
> >> I can't get to/at it easily, so while I could probably fix this in a few
> >> hours if the machine were in front of me, I'm struggling over a slow
> >> unreliable laggy link. 
> >> 
> >> Ok, enough whining from me.
> >> 
> >> I have a new Xorcom plugged into the usb of a Suse 11 machine
> >> I built Dahdi from trunk (last thursday) 
> >> 
> >> # svn checkout http://svn.digium.com/svn/dahdi/linux/trunk dahdi-linux
> >> # svn checkout http://svn.digium.com/svn/dahdi/tools/trunk dahdi-tools
> >> 
> >> dahdihardware -v sees the box but no spans.
> > 
> > Generally '/etc/init.d/dahdi start' . Or more specifically,
> > 'dahdi_registration on' .
> > 
> > See also:
> > 
> >  http://docs.tzafrir.org.il/dahdi-tools/README.Astribank.html#_installation_scenarios
> 
> 
> I've must be missing something here - this is what I see now.....
> 
> sh-4.0# dahdi_hardware -v
> usb:001/020          xpp_usb+     e4e4:1162 Astribank-modular FPGA-firmware
>  LABEL=[usb:X1037246]       CONNECTOR=@usb-0000:00:1a.7-4 
> 
> Shouldn't I see spans ??? I think the box (I've never seen it, but I know what I asked for) 
> has 8fxs+8fxo+2E1 . 

Yes, you should. Any relevant kernel messages?

If not: try:

  rmmod xpp_usb
  modprobe xpp_usb

What new messages do you then see in /var/log/messages ?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir