[asterisk-users] is it possible to connect Digium TE420 and Cisco card?

[Aurimas Skirgaila]

Hello,

I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to
providers Cisco 2800 with  VWIC-1MFT-E1 card.

the same card runs fine with another E1 provider.

TE420 led's lite green.

 Message type: RELEASE COMPLETE (90)
< [08 02 80 ac]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
 Location: User (0)
<                  Ext: 1  Cause: Requested channel not available (44),
class = Network Congestion (resource unavailable) (2) ]
-- Processing IE 8 (cs0, Cause)
q931.c:3760 q931_receive: call 32770 on channel 1 enters state 0 (Null)
Sending Receiver Ready (31)
<skip>
    -- Channel 0/1, span 1 got hangup, cause 44
    -- Forcing restart of channel 0/1 on span 1 since channel reported in
use
q931.c:3000 q931_restart: call 32768 on channel 1 enters state 62 (Restart)

[zaptel.conf]
span=1,1,0,ccs,hdb3,crc4    #switching timing between 0/1 does not have any
effect,
bchan=1-15,17-31
dchan=16

[zapata.conf]
group=1
pridialplan = unknown
switchtype=euroisdn
context = trunk-1
signalling = pri_net
channel => 1-15,17-31

Hardware - Dell PowerEdge R200. Now moved onto barebone test server, but
same errors persist.

-- 
Mvh,
Aurimas Skirgaila
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100329/ef0f5c5d/attachment.htm