[asterisk-users] High Availability Asterisk PBX

[Jai Rangi]

Dns srv might be the solution for you.

Jai 
www.didforsale.com

------Original Message------
From: RESEARCH
Sender: asterisk-users-bounces at lists.digium.com
To: asterisk-users at lists.digium.com
ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] High Availability Asterisk PBX
Sent: Mar 14, 2010 10:27 PM

Hi 
I have the following scenario
A. A PBX on location A with network 192.168.1.1 with extension range 1XXX
and connected to the PSTN Network via the E1
B. Another PBX on location B with network 172.30.18.1 with extension range
2XXX and connected to the PSTN Network via the E1

I need to configure the system and the endpoints such that when one system,
says, A goes down, the system B assumes A responsibility. HALinux would have
been my answer but this should work only on the same subnet

Any advice
Sam



-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Jai Rangi
1949 419 7634