[asterisk-users] Problem with Sangoma card...

[Carlos Chavez]

On Thu, 29 Jul 2010 20:47:58 -0500 (CDT), Tim Nelson wrote
> ----- "Carlos Chavez" <cursor at telecomabmex.com> wrote:
> > I have a problem with a Sangoma card.  It worked until yesterday. 
> > Now
> > I keep getting this error:
> > 
> > Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling
> > mode!
> > Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No
> > 'DeviceSelect' from target: pci fatal error! (0x000FA000)
> > Jul 29 17:45:48 pbxacura last message repeated 30946 times
> > 
> > 	It is using Wanpipe 3.5.6 and Zaptel 1.4.12.1 with Asterisk 1.4.30
> > and
> > MFC/R2.  The E1 shows Tx side blocked and no calls in or out.  I
> > reinstalled Wanpipe and Zaptel but I keep getting the same error.
> >
> 
> Sounds like your card needs to be:
> 
> 1. Reseated in it's PCI slot
> 2. RMA'ed to Sangoma
> 
> Either way, contact Sangoma's top notch tech support and they'll 
> either help you fix the issue or get you a replacement.
> 
     I already moved the card to another PCI slot and contacted tech support
at Sangoma.  Just covering all the bases in case someone here had the same
experience.

--
Carlos Chavez
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001