[asterisk-users] Junghanns QuadBRi not really recognized in Dahdi

[Olivier]

Hi,

I'm using Asterisk 1.6.1.18 with latest Dahdi Linux and Tools (rev 8854) and
libpri 1.4.10.2.

During installation, I'm facing this :
# dahdi_genconf -v system
Default parameters from /etc/dahdi/genconf_parameters
Empty configuration -- no spans

Of course, I've got span descriptions in /etc/dahdi/genconf_parameters :
....
pri_termtype
        SPAN/1          TE
        SPAN/2          TE
        SPAN/3          TE
        SPAN/4          TE


After installation, I've got :

# lspci -vn | grep 1397 -A 7
01:09.0 0204: 1397:08b4 (rev 01)
        Subsystem: 1397:b520
        Flags: medium devsel, IRQ 16
        I/O ports at e800 [size=8]
        Memory at dfebf000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [40] Power Management version 2
        Kernel driver in use: hfc4s8s_l1
        Kernel modules: wcb4xxp, hfc4s8s_l1

# lsmod | grep dah
dahdi                 187464  3 wcb4xxp
crc_ccitt               2080  2 dahdi,hisax

# lsmod | grep hfc
hfc4s8s_l1             11716  0
hisax                 397700  1 hfc4s8s_l1

# lsmod | grep wcb
wcb4xxp                73252  0
dahdi                 187464  3 wcb4xxp

# dahdi_scan
# dahdi_cfg -vvvv
DAHDI Tools Version - SVN-trunk-r8854

DAHDI Version: 2.3.0
Echo Canceller(s):
Configuration
======================


Channel map:


0 channels to configure.



Is there something I could do to get this card working ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100708/732aef13/attachment-0001.htm