[asterisk-users] pri CLI command not available

[Tzafrir Cohen]

On Thu, Jan 21, 2010 at 05:12:32PM -0500, John Novack wrote:
> In the "good old days" ( ZAPTEL ) Channel => had to be the last line in 
> a section. Everything after channel => was ignored.
> 
> Seems that has not changed.
> 
> A hard learned lesson by many !

This has not changed.

However as of 1.6.1, a saner syntax is also supported (it is also
supported in earlier versions, but only in users.conf)

[some-section-name]
dahdichan = 1-23
signalling = pri_cpe


If you have 'dahdichan' in a certain section it is the same as if you
have 'channel' in the end of it. Separate sections in dahdi_chan.conf
(not only [channels]) are supported as of 1.6.1 .

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir