[asterisk-users] Dial cellphone from one PBX1 to PBX2? is it possible?

[khalid touati]

OK! you're right Mr William, that worked, unfortunately i don't know if
there is any points to affect to somebody who helped you (like rating in
other forums) :(, but one more request can you recommand me a book to master
and tweak dialplans?

2010/1/29 William Stillwell (Lists) <william.stillwell-lists at ablebody.net>

>  You are using contexts..
>
>
>
> Look @ destination pbx, you should see  something like this:
>
>
>
> Rejected connect attempt from <ip of source pbx>, request ‘ext@<incoming
> conext>’ does not exist
>
>
>
> If you didn’t put a context under the peer, it uses the default one in the
> iax.conf file which is normally [default]
>
>
>
>
>
>
>
>
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *khalid touati
> *Sent:* Friday, January 29, 2010 11:54 AM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Dial cellphone from one PBX1 to PBX2? is
> it possible?
>
>
>
> Hi William,
>
> I appreciate your answer, though can you make things more clear for me:
>
> 1- i am not using extensions when registering PBX boxes in IAX files.
>
> 2- is inbounx context in the call sender PBX (pbx1) and outbound context is
> in the call receiver (or dialer) PBX (pbx2)?
>
> 3- i am using two identical dialplan's is this gonna confuse
> the communication process (contextes's name are duplicated over the two
> servers)
>
>
>
> thank you very much for making it clear for me!
>
> 2010/1/28 William Stillwell (Lists) <william.stillwell-lists at ablebody.net>
>
> Your inbound context needs to have access to your outbound context.
>
>
>
> [iax-inbound]
>
>
>
> Include => outbound-conext
>
>
>
>
>
> [outbound-context]
>
>
>
> Exten => _1NXXNXXXXXX,1,Dial(DAHDI\g1\${EXTEN})
>
>
>
>
>
>
>
> Something like that.
>
>
>
>
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *khalid touati
> *Sent:* Thursday, January 28, 2010 3:29 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Dial cellphone from one PBX1 to PBX2? is it
> possible?
>
>
>
> Hi Guys,
>
> i am using two PBX's i can call from pbx1 a cellphone tied to pbx2 that
> way:
>
> 1) use a phone in PBX1
>
> 2) call extension in PBX2
>
> 3) extensions in PBX2 ring to a cellphone (as this specific ext is tied to
> a cellphone)
>
>
>
> my questions now is : am i gonna be able to dial from an IPphone registered
> within PBX1 to a cellphone by using the Trunk (Zap or dahdi) of PBX2?
> anybody know
>
> IPphone------------->PBX1-----IAX-------->PBX2--------PRI
> line------------------->cellphone???????????
>
> thank you for you help guys!!
> --
> Abdullah
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> Abdullah
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Abdullah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100203/ebc700c6/attachment.htm