[asterisk-users] Correct operation of timout parameter for dial application

[Bruce McAlister]

I have now logged issue number 0018447 relating to this query.

Thanks all for your responses.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tilghman Lesher
Sent: 03 December 2010 22:53
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Correct operation of timout parameter for dial application

On Tuesday 30 November 2010 07:14:34 Bruce McAlister wrote:
> Hi All,
> 
> I'd just like to verify what the correct operation of the timeout
> parameter is for the dial application. I'm not sure if I've encountered
> a bug or a configuration issue.
> 
> When a sip phone is not responding to invites on an outbound call, the
> dial application still waits the duration of timeout before continuing
> with dialplan execution. I was under the impression that app_dial would
> timeout on the signalling prior to the timeout parameter specified in
> the dial parameter.
> 
> For example, consider the following dialplan:
> 
> exten => 111,1),Dial(SIP/phone1,30,tg)
> exten => 111,n,NoOp(DialStatus=${DIALSTATUS})
> exten => 111,n,GotoIf($[${DIALSTATUS} = CHANUNAVAIL]?unavail)
> exten => 111,n,GotoIf($[${DIALSTATUS} = NOANSWER]?unavail)
> exten => 111,n,GotoIf($[${DIALSTATUS} = BUSY]?busy)
> exten => 111,n,GotoIf($[${DIALSTATUS} = CONGESTION]?busy)
> exten => 111,n(unavail), Goto(voice-mail,vmu-phone1,1)
> exten => 111,n(busy), Goto(voice-mail,vmb-phone1,1)
> 
> Under normal operation the originating caller is passed through to
> voicemail. However, if/when the device is not responding to invites,
> for whatever reason, the dial application waits 30 seconds before
> setting the DIALSTATUS to NOANSWER. Is this expected behaviour? In
> previous versions of asterisk, specifically (v1.2/v1.4) when the device
> did not respond to invites the dial application exited prior to the
> value specified by timeout.
> 
> Can anyone clarify this issue for me please? Is this expected behaviour?

I seem to recall an issue like that some time back where somebody thought
that if their SIP phone wasn't responding, the Dial app should wait the
full 30 seconds before giving up, but I cannot find the related commit for
that.  I'm sure there's arguments on both sides for the behavior.  I'd
suggest that you open an issue on issues.asterisk.org, and we can take a
look at how we could accommodate both approaches.

-- 
Tilghman Lesher
Digium, Inc. | Senior Software Developer
twitter: Corydon76 | IRC: Corydon76-dig (Freenode)
Check us out at: www.digium.com & www.asterisk.org

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users