[asterisk-users] help with dialplan

[Todd Reese]

  I had already check on this.   Thanks for the info, though.


On 8/31/2010 10:36 AM, Danny Nicholas wrote:
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Todd Reese
> Subject: Re: [asterisk-users] help with dialplan
>
>>   asterisk*CLI>  dialplan show 6789542133 at remote
>> There is no existence of 'remote' context
>> Command 'dialplan show 6789542133 at remote' failed.
>> asterisk*CLI>
>
>>> On 8/31/2010 9:58 AM, Paul Belanger wrote:
>>>> dialplan show 6789542133 at remote
> Ok. I'm a late joiner to this thread.  Reading the "original post" I see
> that you are trying to do an external SIP dial to 678-954-2133.  These
> questions:
> 1. Does the dial string need to be 1xxx instead of xxx (presumably local 10
> digit dialing)? If yes, change
> exten =>  _NXXNXXXXXX,n,Dial(SIP/v6781234567/${EXTEN},40,Ttr)
> to
> exten =>  _NXXNXXXXXX,n,Dial(SIP/v6781234567/1${EXTEN},40,Ttr)
> 2. voipdialACA and v6781234567 are registered trunks with credentials?
>
> Hope this helps.
>
>
>
>