[asterisk-users] DAHDI not detecting caller hangup

[--[ UxBoD ]--]

----- Original Message -----
> On Tue, 24 Aug 2010, --[ UxBoD ]-- wrote:
> 
> > ----- Original Message -----
> >> On Mon, Aug 23, 2010 at 11:56 AM, --[ UxBoD ]--
> >> <uxbod at splatnix.net>
> >> wrote:
> >>> Odd problem have just noticed in that when I call into the PBX
> >>> DAHDI
> >>> detects the call and hands it off to the extension, if I then hang
> >>> up it still continues to process through the dialplan.
> >>>
> >> It is common for telco not to provide a disconnect tone for Analog.
> >> You'll need to confirm one is there, either ask your telco or have
> >> Asterisk record the line. Then update your indications.conf with
> >> your
> >> disconnect tone.
> >>
> >> Also be sure you set a TIMEOUT in your dialplans.
> >>
> >
> > I am pretty sure that BT (British Telecom) do provide a disconnect
> > tone.
> > Hopefully somebody from the UK, Gordon, will be able to confirm this
> > and
> > whether they have experienced this issue ?
> 
> I've not heard a hangup tone myself and I've never enabled disconnect
> tone
> support... Just checked on my home line (bog-standard BT line) -
> calling
> from a mobile and from another VoIP account - Asterisk detected the
> line
> hangup almost immediately... However my systems are tried, tested and
> trusted asterisk 1.2 and Zaptel.
> 
> If I don't answer it, but hangup, it does seem to sometimes take a
> second
> or 2 to detect the hangup, but I'm not sure if that's just BT.
> 
> Analogue lines. Bah. Hate them. Use VoIP.
> 
> Gordon
> 

Hi Gordon,

Thanks for that .. Yes I do have VoIP lines as-well ... This is our old number on BT which is tied to DSL. Some people still use the number, even though we have given them the VoIP number, so had to put in a TDM to handle it.  I know what you mean though :)
-- 
Thanks, Phil