[asterisk-users] IXJ issues on 1.4.35

[Infra]

On Wed, 18 Aug 2010, Infra wrote:

>
> My thanks for previous help on fixing IXJ issues in 1.2.40; I now
> have problems with a just-built 1.4.35 on the same host:
>
> [Aug 18 17:26:48] WARNING[27209]: app_dial.c:1298 dial_exec_full: Unable
> to create channel of type 'Phone' (cause 0 - Unknown)
>   == Everyone is busy/congested at this time (1:0/0/1)
>
> O/S: Linux 2.4.27; IXJ driver for Linux Rev. 3.5, gcc 3.01
>
> I applied the patch for dialtone as per my issue on 1.2.40.
>
> Build log contains no warnings for chan_phone.
>
> Build tested using install to DESTDIR=/tmp/asterisk; make samples;
> edited 'extensions.conf' to uncomment extension '1265' (Phone/phone0);
> added skinny extension to test Cisco 7920 (which worked except for
> audio stalling):
>
> exten => 1266,1,Dial(Skinny/1266 at 7920-1)
> exten => 1266,n,Goto(s,5)
>
> Asterisk started with -vvv -C /tmp/asterisk/etc/asterisk/asterisk.conf
> and controlled from 'asterisk -r'
>
> What other debugging should I enable?
>
> Again, all help is much appreciated.


Jumpped the gun -- I didn't finish editing the sample 'phone.conf' file;
the fxs line is now working, but without dialtone.  I will revert to the
unpatched version of chan_phone.c and test again.