[asterisk-users] BN8S0, dahdi, wcb4xxp

[Claire Sinn]

Am Mittwoch, 28. April 2010 16:21:44 schrieben Sie:
> On Wed, Apr 28, 2010 at 03:56:04PM +0200, Claire Sinn wrote:
> > Am Mittwoch, 28. April 2010 09:58:14 schrieb Tzafrir Cohen:
> > > On Wed, Apr 28, 2010 at 07:12:57AM +0200, Claire Sinn wrote:
> > > > Hi,
> > > >
> > > > a few month ago, I tried to install zaptel for my Beronet BN8S0 pci
> > > > card... I gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to
> > > > support the card and I'm very interested to get it to work.
> > > > But how to get rid of these annoying qozap driver?
> > > >
> > > > bishop dahdi # lspci -v -nn -s 01:00.0
> > > > 01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN
> > > > network Controller [HFC-8S] [1397:16b8] (rev 01)
> > > >         Subsystem: Cologne Chip Designs GmbH Device [1397:b562]
> > > >         Flags: medium devsel, IRQ 21
> > > >         I/O ports at 9480 [size=8]
> > > >         Memory at fb9bb000 (32-bit, non-prefetchable) [size=4K]
> > > >         Capabilities: [40] Power Management version 2
> > > >         Kernel modules: wcb4xxp, hfcmulti
> > > >
> > > > bishop dahdi # modprobe wcb4xxp
> > > > bishop dahdi # lspci -v -nn -s 01:00.0
> > > > 01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN
> > > > network Controller [HFC-8S] [1397:16b8] (rev 01)
> > > >         Subsystem: Cologne Chip Designs GmbH Device [1397:b562]
> > > >         Flags: medium devsel, IRQ 21
> > > >         I/O ports at 9480 [size=8]
> > > >         Memory at fb9bb000 (32-bit, non-prefetchable) [size=4K]
> > > >         Capabilities: [40] Power Management version 2
> > > >         Kernel driver in use: wcb4xxp
> > > >         Kernel modules: wcb4xxp, hfcmulti
> > > >
> > > > bishop dahdi # dahdi_hardware -v
> > > > driver should be 'qozap' but is actually 'wcb4xxp'
> > > > pci:0000:01:00.0     qozap+       1397:16b8 Junghanns OctoBRI ISDN
> > > > card
> > >
> > > Seems like the list of devices in Dahdi::Hardware::PCI is not
> > > up-to-date.
> >
> > I tried to ignore the output of dahdi_hardware, but it seems to be more
> > than a cosmetic problem. The half of the ports are jumpered for TE mode
> > (port 1,2,7 and 8) and they work fine. The remaining ports are jumpered
> > for NT use and produce a RED alarm.
> >
> > bishop asterisk # grep wcb4xxp /var/log/kern.log |tail -n 14
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: probe called for
> > b4xx... Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: PCI INT A ->
> > GSI 21 (level, low) -> IRQ 21
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Identified BeroNet
> > BN8S0 (controller rev 1) at 0000000000019480, IRQ 21
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: NOTE: hardware echo
> > cancellation has been disabled
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 1: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 2: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 3: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 4: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 5: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 6: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 7: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Port 8: TE mode
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: Did not do the
> > highestorder stuff
> > Apr 28 07:03:28 bishop kernel: wcb4xxp 0000:01:00.0: new card sync
> > source: port 3
> >
> > Can I force wcb4xxp to configure some ports in NT mode?
> > Clairef
> 
> I suspect this should be easy to fix. Any chance you can try it with the
> SVN version?
> 
> Try test:
> 
>   svn checkout http://svn.digium.com/svn/dahdi/linux/trunk dahdi-linux
>   cd dahdi-linux
>   make # but don't install
> 
> The following must be run as root:
> 
>   # Unload existing drivers (you may also want to stop asterisk first:
>   /etc/init.d/dahdi stop
>   # load local drivers:
>   modprobe crc-ccitt # just in case it's not yet loaded
>   insmod ./drivers/dahdi/dahdi.ko
>   insmod ./drivers/dahdi/wcb4xxp/wcb4xxp.ko
> 
> I suspect this won't fix the issue, but it will shorten the test cycle.
> 
Mission accomplished. crc-ccitt is compiled into the kernel, but not as a 
module.

bishop dahdi-linux # dahdi_hardware -v
driver should be 'qozap' but is actually 'wcb4xxp'
pci:0000:01:00.0     qozap+       1397:16b8 Junghanns OctoBRI ISDN card

Where is the difference?
C.e