[asterisk-users] URGENT - How to exclude one ZAP channel for outgoin and incoming calls

[Zeeshan Zakaria]

In your zapata.conf, under group 0 do: channel => 1-3,5-20. It works for PRI
but haven't tried it for FXO.

Have you tried disabling this line in zaptel.conf? Maybe that'll help.

Zeeshan A Zakaria

--
Sent from my Android phone with K-9 Mail.

On 2010-04-08 8:29 AM, "bruce bruce" <bruceb444 at gmail.com> wrote:

Thanks guys for all the input. I have just noticed that the solution doesn't
work for me because the 20 lines are in a hunt. And the line in problem is
actually the 4th line and not the 1st. So, for incoming calls, if I have
more than 3 calls the 4th one will keep ringing for ever and it won't go to
the 5th line unless there is a busy on it.

Is there anyway I can put a busy voltage on this line without ramping up a
big bill? If the line status shows busy then both of incoming and outgoing
calls will use the next line available.

I am trying to go this route for couple of days until I get the telco to
drop by or if the darn rain stops.

Thanks,
Bruce



On Wed, Apr 7, 2010 at 2:56 PM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Since this is hopefu...

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100408/930fd08b/attachment.htm