[asterisk-users] IAX Problem

[bob gailer]

Thank you for your interest in my question and quick response. I am 
relatively new to Asterisk, so I have a few specific questions regarding 
your suggestions.

Then I will post to the list with a more meaningful subject and results.

On 4/6/2010 10:31 AM, Steve Edwards wrote:
> On Tue, 6 Apr 2010, bob gailer wrote:
>
>    
>> I have2 Trixbox Servers. Each has an IAX trunks to the other. One works
>> the other fails:
>>
>>      -- Executing [s at macro-dialout-trunk:19] Dial("SIP/526-09eec7c8",
>> "IAX2/InterOffice/210,300,tr") in new stack
>>      -- Called InterOffice/210
>>      -- Hungup 'IAX2/InterOffice-7578'
>>    == Everyone is busy/congested at this time (1:0/0/1)
>>
>> The only difference I am aware of is that one server has a public IP
>> address, the other is behind a NAT.
>>
>> The trunk from the server with the public address works fine.
>>
>> I added nat=yes to the other's peer details - did not help.
>>
>> What should I do?
>>      
> 1) Set "auth=plaintext" (only for the duration of the debug session)
Where / how do I do that. Is that in the trunk peer settings?
> enable iax2 debugging on the CLI.
>    

I did that; I now get without any action on my part:

Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass: NEW
    Timestamp: 00001ms  SCall: 00714  DCall: 00000 [67.228.218.114:4569]

Whence cometh those lines?

When I call I get:

    VERSION         : 2
    CALLED NUMBER   : 210
    CODEC_PREFS     : (ulaw|alaw|gsm)
    CALLING NUMBER  : 526
    CALLING PRESNTN : 0
    CALLING TYPEOFN : 0
    CALLING TRANSIT : 0
    CALLING NAME    : Bob's Office
    LANGUAGE        : en
    FORMAT          : 4
    CAPABILITY      : 14
    ADSICPE         : 2
    DATE TIME       : 2010-04-06  10:54:08

> You should see the "NEW" request and the passwords in plaintext.
>    

What passwords? Where / how does one specify passwords?

> Verify the username, password, context, and extension all exist.
>
> 2) Reply with the sanitized console output.
>    

What do you mean by sanitized. I assume you want just the relevant 
output. True?

Thanks in advance.

-- 
Bob Gailer
919-636-4239
Chapel Hill NC