[asterisk-users] DAHDI Caller ID problem

Danny Nicholas danny at debsinc.com
Fri Sep 18 08:07:22 CDT 2009


Cidstart=polarity or cidstart=ring will probably fix this.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
herb at cfht.hawaii.edu
Sent: Thursday, September 17, 2009 8:04 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] DAHDI Caller ID problem

Aloha,

I'm finishing up the final touches on this install, and have run into an
odd problem.

I can't seem to get Caller ID on the analog phone lines working. It's a 
Digium AEX 410 card.

I have Verbose set and a line to print the CID:

I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf
and users.conf

[analog]
include=>default
exten => s,1,Verbose(passed id is ${CALLERID(num)})
exten => s,2,Answer
exten => s,3,Dial(SIP/100,,)

And this is what I'm getting.

*CLI> core set verbose 10
Verbosity was 1 and is now 10
    -- Starting simple switch on 'DAHDI/1-1'
[Sep 17 14:44:05] NOTICE[15308]: chan_dahdi.c:7542 ss_thread: Got event 18
(Ring Begin)...
[Sep 17 14:44:07] NOTICE[15308]: chan_dahdi.c:7542 ss_thread: Got event 2
(Ring/Answered)...
[Sep 17 14:44:07] NOTICE[15308]: chan_dahdi.c:7706 ss_thread: MWI: Channel
1 message waiting!
    -- Executing [s at analog:1] Verbose("DAHDI/1-1", "passed id is ") in new
stack
passed id is
    -- Executing [s at analog:2] Answer("DAHDI/1-1", "") in new stack
    -- Executing [s at analog:3] Dial("DAHDI/1-1", "SIP/100,,") in new stack
  == Using SIP RTP CoS mark 5
    -- Called 100
    -- SIP/100-b6a22338 is ringing
    -- SIP/100-b6a22338 answered DAHDI/1-1
  == Spawn extension (analog, s, 3) exited non-zero on 'DAHDI/1-1'
    -- Hungup 'DAHDI/1-1'

I'm also getting these errors:
[Sep 17 14:01:06] ERROR[14462]: callerid.c:562 callerid_feed: No start bit
found in fsk data.
[Sep 17 14:01:06] WARNING[14462]: chan_dahdi.c:7582 ss_thread: CallerID
feed failed: Success
[Sep 17 14:01:06] WARNING[14462]: chan_dahdi.c:7686 ss_thread: CallerID
returned with error on channel 'DAHDI/1-1'

I have tried calleridsignal=dtmf & ring, as well as calleridstart=ring &
polarity.  No love.

I searched on google for info, but nothing I found had a solution for my
problem.

I know that there's something I missing, but I can't seem to figure it
out.  Can you all help me?

Thanks in advance!

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list