[asterisk-users] mISDN NT mode config setting

[hbk]

Hi,

I am struggling to get plain Cologne chip cards to run in NT mode, runs
nice in TE mode despite the error message:

login as: root
root at 192.168.2.22's password:
Last login: Tue Sep  1 23:09:24 2009 from 192.168.2.50

Welcome to Elastix
----------------------------------------------------

misdnportinfo
Port  1: TE-mode BRI S/T interface line (for phone lines)
 -> Protocol: DSS1 (Euro ISDN)
 -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
 -> childcnt: 2
 * Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port  2: TE-mode BRI S/T interface line (for phone lines)
 -> Protocol: DSS1 (Euro ISDN)
 -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
 -> childcnt: 2
 * Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port  3: NT-mode BRI S/T interface port (for phones)
 -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
 * Port NOT useable for PBX (maybe there is already a PBX running?)
--------
Port  4: NT-mode BRI S/T interface port (for phones)
 -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
 * Port NOT useable for PBX (maybe there is already a PBX running?)
--------

I do:

etc/misdn-init.conf

card=1,hfcpci
card=2,hfcpci
card=3,hfcpci
card=4,hfcpci

te_ptmp=1,2
nt_ptp=3,4

---

etc/misdn.conf

<mISDNconf>
    <module poll="128" debug="0" timer="no">hfcmulti</module>
    <module debug="0" options="0">mISDN_dsp</module>
    <devnode user="asterisk" group="asterisk" mode="660">mISDN</devnode>
    <card type="hfcpci">
        <port mode="te" link="ptmp">1</port>
    </card>
    <card type="hfcpci">
        <port mode="te" link="ptmp">1</port>
    </card>
    <card type="hfcpci" dtmf="yes" crystalclock="yes">
        <port mode="nt" link="ptp">1</port>
    </card>
    <card type="hfcpci" dtmf="yes" crystalclock="yes">
        <port mode="nt" link="ptp">1</port>
    </card>
</mISDNconf>

--

etc/asterisk/misdn.conf

;Tried with both config's no change

misdn_init=/etc/misdn-init.conf
;misdn_init=/etc/mISDN.conf


[trunks]
ports=1,2
context=from-trunk
msns=*

[NTports]
context=from-internal
ports=3,4
msns=*

-------------------------------------------------------
I am using Elastix 1.5 not updated

Any tips?
Where can I find documentation?

Thank you!
HB