[asterisk-users] some issue with libpri cant go past 1.4.1

[Jerry Geis]

In my previous post which included CLI from a working call and non 
working call I did a diff of the two
trying to find out why libpri 1.4.10.2 does not work and 1.4.1 does work 
(I am trying to upgrade).

below is the difference that stuck out. This was EXTRA in 1.4.10.2 which 
is the libpri that does not work for me.

Does this mean something to someone and is this a setup error I have or 
is there a libpri error?
(summary is provided again at the bottom of this email)

Thanks Jerry

[ 00 01 56 5e 08 02 00 03 5a 08 02 81 d1 ]
 
  > Informational frame:
  > SAPI: 00  C/R: 0 EA: 0
  >  TEI: 000        EA: 1
  > N(S): 043   0: 0
  > N(R): 047   P: 0
  > 9 bytes of data
  Stopping T_203 timer
  Starting T_200 timer
  -- Restarting T200 timer
  ^M^[[Kmndemo*CLI> ^M> Protocol Discriminator: Q.931 (8)  len=9
  > Call Ref: len= 2 (reference 3/0x3) (Originator)
  > Message type: RELEASE COMPLETE (90)
  > [08 02 81 d1]
  > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  
Location: Private network serving the local user (1)
  >                  Ext: 1  Cause: Invalid call reference value (81), 
class = Invalid message (e.g. parameter out of range) (5) ]
  NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
  NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null



I have a digium TE205P setup as PRI channels 18-23 esf,b8zs dchan is 24.
using asterisk 1.4.26.2 libpri 1.4.1 WORKS and libpri 1.4.10.2 does not.
using zaptel 1.4.12.1

When I make calls incoming they work. when I try to make outgoing calls 
they do not work.

(previous message has botha working CLI and an error CLI output)

What should I do next? Thanks,

Jerry