[asterisk-users] Having a heck of a time

[BJ Weschke]

On Wed, Oct 28, 2009 at 2:09 PM, Robert Grignon <rgrignon at fleetone.com> wrote:
> This has been a rollercoaster ride....
>
> Building a new gateway (Asterisk 1.6.1 / Sangoma A108D 3.5.8 drivers)
>
> Where I stand right now, I have a PRI on the gateway and circuit is working
> I can make calls through the gateway....
>
>
>
> Here is my problem:
> DAHDI_TEST is not returning anything and DAHDI_MONITOR doesn't work....
>
> [root at lin-vgw1 asterisk]# dahdi_test
> Opened pseudo dahdi interface, measuring accuracy...
>
> --- Results after 0 passes ---
> Best: 0.000 -- Worst: 100.000 -- Average: 100.000000, Difference: 100.000000
>
> Also if I establish a call and run dahdi_monitor it doesnt look quite like
> it is supposed to:
>
> [root at lin-vgw1 asterisk]# dahdi_monitor 121 -vv
>
> Visual Audio Levels.
> --------------------
>  Use chan_dahdi.conf file to adjust the gains if needed.
>
> ( # = Audio Level  * = Max Audio Hit )
> <----------------(RX)---------------->
> <----------------(TX)---------------->
>
> I'm looking for some ideas here?
>

 I could be way off, but I think the fact that it says it's opening
the psuedo interface implies that it doesn't see your Sangoma card.
You might want to try and check with Sangoma support to see what they
have to say about that.


-- 
Bird's The Word Technologies, Inc.
http://www.btwtech.com/