[asterisk-users] SIP interconnection problem

[Robert Bielik]

Someone? As * is used so extensively with SIP I must've made a _glaring_ mistake in my config (!)

/Rob

Robert Bielik skrev:
> Tarek Sawah skrev:
>> you need to post you SIP.conf and your Extensions.conf so someone can 
>> have a look at them and see if there is anything missing
>> what are the contexts you are using with your peers?
>> what is the dial plan triggered when calling your destination number?
> 
> Machine 1 -------------------------------------------------------
> iax.conf: ======================
> [general]
> bandwidth=low
> disallow=lpc10                  ; Icky sound quality...  Mr. Roboto.
> jitterbuffer=no
> forcejitterbuffer=no
> autokill=yes
> 
> [2200]
> type=friend
> host=dynamic
> context=users
> username=2200
> secret=none
> auth=md5
> 
> sip.conf =======================
> [general]
> port=5060
> bindaddr=0.0.0.0
> 
> disallow=all
> allow=alaw ; Allow codecs in order of preference
> allow=ulaw
> allow=gsm
> allow=g726
> 
> dtmfmode=rfc2833
> 
> register => machine_1:wabooba at 192.168.10.77/machine_2
> 
> [machine_2]
> allow=alaw,ulaw,gsm,g726
> host=dynamic
> secret=wabooba
> type=friend
> context=sip_incoming
> username=machine_2
> 
> extensions.conf ==================
> [general]
> static=yes
> writeprotect=no
> clearglobalvars=no
> 
> [globals]
> ; The outgoing sip trunk
> SIP_TRUNK=192.168.10.77
> OUTGOING_PREFIX=0
> 
> [default]
> include => sip-incoming
> include => test
> 
> [test]
> ; Create an extension, 600, for evaluating echo latency.
> ;
> exten => 600,1,Playback(demo-echotest)  ; Let them know what's going on
> exten => 600,n,Echo                     ; Do the echo test
> exten => 600,n,Playback(demo-echodone)  ; Let them know it's over
> exten => 600,n,Goto(s,6)
> 
> [users]
> include => sip-incoming
> include => outgoing
> include => test
> 
> [sip-incoming]
> include => agi-async
> include => internal
> 
> [agi-async]
> exten => _01XXXX,1,Agi(agi:async)
> 
> [internal]
> exten => _2XXX,1,NoOp()
> exten => _2XXX,n,Dial(IAX2/${EXTEN})
> exten => _2XXX,n,Hangup()
> 
> [outgoing-agi-async]
> exten => _${OUTGOING_PREFIX}.,1,Dial(SIP/${EXTEN}@${SIP_TRUNK})
> exten => _${OUTGOING_PREFIX}.,n,Set(CALLERID(name)=reason-${DIALSTATUS})
> exten => _${OUTGOING_PREFIX}.,n,Agi(agi:async)
> 
> [outgoing]
> exten => _${OUTGOING_PREFIX}.,1,Dial(SIP/${SIP_TRUNK}/${EXTEN:1})
> exten => _${OUTGOING_PREFIX}.,n,Hangup()
> 
> Machine 2 --------------------------------------------------------
> sip.conf =======================
> [general]
> port=5060
> bindaddr=0.0.0.0
> 
> disallow=all
> allow=alaw ; Allow codecs in order of preference
> allow=ulaw
> allow=gsm
> allow=g726
> 
> dtmfmode=rfc2833
> 
> register => machine_2:wabooba at 192.168.10.11/machine_1
> 
> [machine_1]
> allow=alaw,ulaw,gsm,g726
> host=dynamic
> secret=wabooba
> type=friend
> context=sip_incoming
> username=machine_1
> 
> extensions.conf ==================
> [globals]
> ; The outgoing sip trunk
> SIP_TRUNK=192.168.10.11
> 
> Rest is exactly the same. I have a zoiper connected to each machine and I'm trying to make a call from Machine 2 to zoiper
> on Machine 1:
> 
>     -- Registered IAX2 '2200' (AUTHENTICATED) at 192.168.10.113:4569
>     -- Accepting AUTHENTICATED call from 192.168.10.113:
>        > requested format = gsm,
>        > requested prefs = (),
>        > actual format = gsm,
>        > host prefs = (),
>        > priority = mine
>     -- Executing [02200 at users:1] Dial("IAX2/2200-1200", "SIP/192.168.10.11/2200") in new stack
>   == Using SIP RTP CoS mark 5
>     -- Called 192.168.10.11/2200
> [Oct 26 09:20:25] NOTICE[20248]: chan_sip.c:15031 handle_response_invite: Failed to authenticate on INVITE to '"2200" <sip:2200 at 192.168.10.77>;tag=as6173091f'
>     -- SIP/192.168.10.11-090c2ea8 is circuit-busy
>   == Everyone is busy/congested at this time (1:0/1/0)
>     -- Executing [02200 at users:2] Hangup("IAX2/2200-1200", "") in new stack
>   == Spawn extension (users, 02200, 2) exited non-zero on 'IAX2/2200-1200'
>     -- Hungup 'IAX2/2200-1200'
> 
> Besides that "sip show peers" on either machine shows the other one correctly registered, and "iax2 show peers" shows the connected zoiper on each machine.
> 	
> Ideas, please ??
> 
> TIA
> /Rob
> 
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users