[asterisk-users] MWI for multiple voice mail boxes

John A. Sullivan III jsullivan at opensourcedevel.com
Fri Oct 16 12:04:43 CDT 2009


Alas, it does not work for me on 1.6.1.6.  That was my original
configuration based upon the documentation.  It was slightly different
than you have because I specified the context.  tkeeley is in context
a10f but the mailboxes are in context a10. Thus, I had:

[tkeeley]
mailbox=612 at a10, 610 at a10

It then complains that it cannot find mailox 610 in context a10.
However, it is there and it does receive voice mail.  Thanks - John

On Fri, 2009-10-16 at 10:14 -0500, Danny Nicholas wrote:
> Let's stick a fork in this one - 
> Here's the link I used
> http://www.voip-info.org/wiki/view/Asterisk+sip+mailbox
> 
> if we make tkeely's sip.conf look like this
> [tkeeley]
> Type=peer
> Context=a10
> Mailbox=612, 610
> 
> He? Should be good to go.
> 
> This worked on 1.4.26.1
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of John A.
> Sullivan III
> Sent: Thursday, October 15, 2009 8:14 PM
> To: jsmith at digium.com; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: Re: [asterisk-users] MWI for multiple voice mail boxes
> 
> On Thu, 2009-10-15 at 15:29 -0700, Jared Smith wrote:
> > On Wed, 2009-10-14 at 22:41 -0400, John A. Sullivan III wrote:
> > > Hello, all.  I have a user who needs to monitor their voice mail box
> > > and
> > > the general delivery voice mail box.  I defined them in sip.conf as
> > > follows:
> > > 
> > > [tkeeley](a10f)
> > > mailbox=612 at a10, 610 at a10 
> > 
> > I think you've got the syntax wrong here... try mailbox=612 at a10&610 at a10
> > instead.  Contrary to what others on this thread might lead you to
> > believe, this should actually work. :-)
> <snip>
> Ooooo - it really didn't like that:
> 
> mailbox=612 at a10&610 at a10
> 
> app_voicemail.c:1630 messagecount: Couldn't find mailbox 612 in context
> a10&610 at a10
> 
> It looks like it's interpreting everything after the @ as context.  I'm
> running 1.6.1.6.  Thanks anyway - John
-- 
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
jsullivan at opensourcedevel.com

http://www.spiritualoutreach.com
Making Christianity intelligible to secular society




More information about the asterisk-users mailing list