[asterisk-users] Can dial long distance but not local?

[Ben Schorr]

Thanks Cary,

 

If I send as 10 digits (dialing the local area code) I get an error from
the phone co that I've dialed an incorrect number.  Unfortunately I live
in Hawaii where the 808 area code covers the whole state but is treated
differently on neighbor-islands.

 

So if I dial 8085551212 I get information for the neighbor islands
rather than for our local island.

 

I think I tried the 1+ trick with the same results, but I'll give it
another try just in case I overlooked it.

 

 

Ben M. Schorr
Chief Executive Officer
______________________________________________
Roland Schorr & Tower
www.rolandschorr.com <http://www.rolandschorr.com/> 
bens at rolandschorr.com <mailto:bens at rolandschorr.com> 

Twitter: http://www.twitter.com/bschorr

 

 

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Cary Fitch
Sent: Wednesday, October 07, 2009 11:04 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Can dial long distance but not local?

 

Perhaps send it as 10 digits or 1+? 

 

Cary Fitch

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ben Schorr
Sent: Wednesday, October 07, 2009 3:58 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Can dial long distance but not local?

 

AsteriskNOW 1.4.26.2 with a  Digium TE205P connected to an ISDN PRI
(single span).  I'm sure I just have something goofed up in the
dialplans?  I have a bunch of Polycom 331 IP phones connecting to the
server.  I can dial the other extensions in the system fine and I can
dial long distance outgoing but cannot seem to get it to dial local (7
digit) calls.

 

I see this in the CLI:

 

-- Executing [s at macro-dialout-trunk:19] Dial("SIP/801-09b6e498",
"DAHDI/g1/5551212|300|") in new stack 
-- Requested transfer capability: 0x00 - SPEECH 
-- Called g1/5551212 
-- Channel 0/1, span 1 got hangup, cause 28 
-- Hungup 'DAHDI/1-1' 
== Everyone is busy/congested at this time (1:0/0/1) 
-- Executing [s at macro-dialout-trunk:20] Goto("SIP/801-09b6e498",
"s-CHANUNAVAIL|1") in new stack 
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) 
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
GotoIf("SIP/801-09b6e498", "1?noreport") in new stack 
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) 
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:3]
NoOp("SIP/801-09b6e498", "TRUNK Dial failed due to CHANUNAVAIL
(hangupcause: 2  - failing through to other trunks") in new stack 

Also when I check the PRI DEBUG I see an Error 28 which indicates an
invalid number format.  But I'm just sending 5551212, which should be
o.k.

 

I'm a newbie at this...any suggestions welcomed.

 

-Ben-

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/a5a568c1/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 172 bytes
Desc: image001.gif
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/a5a568c1/attachment.gif