[asterisk-users] Zaptel problems on SUSE 9.3

[Angus Asterisk]

That's interesting.  Do you have experience working with both SUSE and
Debian?  Why is Debian easier?


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Josué Conti
Sent: 04 October 2009 15:58
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Zaptel problems on SUSE 9.3

Hello, you can change the O.S for Debian etch 4.0? Is more better and
more easy to install the library and asterisk dependences.

Please let me know

Regards

Josue

2009/10/4 Angus Asterisk <asterisk at iteloffice.com>:
> Hi
>
>
>
> My asterisk output is:
>
> chan_sip.so => (Session Initiation Protocol (SIP))
> Asterisk Ready.
>     -- Registered SIP '201' at 192.168.0.55 port 33906
>     -- Saved useragent "X-Lite release 1011s stamp 41150" for peer 201
>     -- Executing [907768385144 at default:1] Dial("SIP/201-083e75c0",
> "ZAP/g1/907768385144|60") in new stack
> [Oct  4 11:54:27] WARNING[6255]: channel.c:3388 ast_request: No channel
type
> registered for 'ZAP'
> [Oct  4 11:54:27] WARNING[6255]: app_dial.c:1275 dial_exec_full: Unable to
> create channel of type 'ZAP' (cause 66 - Channel not implemented)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing [907768385144 at default:2] Hangup("SIP/201-083e75c0", "")
in
> new stack
>   == Spawn extension (default, 907768385144, 2) exited non-zero on
> 'SIP/201-083e75c0'
>
>
>
> when I make a call from a sip device to my outbound analog trunk using a
> Digium TDM card.
>
>
>
> My /etc/zaptel.conf file:
>
> loadzone=uk
>
> defaultzone=uk
>
> fxsks=1-4
>
>
>
> I am in the uk by the way.
>
>
>
> Relevant part of /etc/astersk/zapata.conf:
>
> signalling=v23   ; added for UK CLI detection
>
> cidstart=polarity   ; added for UK CLI detection
>
> context=frompstnanalog
>
> group=1
>
> callgroup=1
>
> pickupgroup=1
>
> signalling=fxs_ks
>
> channel=>1-4
>
>
>
> part of extensions.conf:
>
> exten => _X.,1,Dial(ZAP/g1/${EXTEN},60)
>
> exten => _X.,2,Hangup
>
>
>
> I am running suse 9.3 on via and read article regarding old version of
> zaptel driver and fixed as per script -
> http://www.voip-info.org/wiki/view/Asterisk+Linux+SuSE
>
>
>
> So now running dmesg reveals:
>
> zaptel: unsupported module, tainting kernel.
>
> Zapata Telephony Interface Registered on major 196
>
> Zaptel Version: 1.4.12.1
>
> Zaptel Echo Canceller: MG2
>
>
>
> So that looks encouraging
>
>
>
> But still getting problem dialing out.
>
>
>
> Also quite worrying is that there are no lights on the Digium card.
>
>
>
> This used to work on same box and same operating system.  I just can’t
> remember how I got it to work last time.
>
>
>
> Anyone have any suggestions?
>
>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users