[asterisk-users] ASTERISK and SNMP

mickael ropars mropars at gmail.com
Fri Nov 27 05:06:13 CST 2009


I am running on Trixbox so my OS is Cent0S 5.4 and the Asterisk version is
1.4.22-4

on asterisk side Snmp module is running:

> module load res_snmp.so
  == Parsing '/etc/asterisk/res_snmp.conf': Found
 Loading [Sub]Agent Module
 Loaded res_snmp.so => (SNMP [Sub]Agent for Asterisk)

see below my snmpd.conf file (I remove commented line for an easy reading)

regards

Mickael




###############################################################################
# Access Control
###############################################################################

####
# First, map the community name (COMMUNITY) into a security name
# (local and mynetwork, depending on where the request is coming
# from):

#       sec.name  source          community
com2sec local     localhost       COMMUNITY
com2sec mynetwork NETWORK/24      COMMUNITY


rwcommunity local
rocommunity local

####
# Second, map the security names into group names:

#               sec.model  sec.name
group MyRWGroup v1         local
group MyRWGroup v2c        local
group MyRWGroup usm        local
group MyROGroup v1         mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork

####
# Third, create a view for us to let the groups have rights to:

#           incl/excl subtree                          mask
view all    included  .1                               80

####
# Finally, grant the 2 groups access to the 1 view with different
# write permissions:

#                context sec.model sec.level match  read   write  notif
access MyROGroup ""      any       noauth    exact  all    none   none
access MyRWGroup ""      any       noauth    exact  all    all    none


###############################################################################
# System contact information
#

syslocation Right here, right now.
syscontact Me <me at somewhere.org>



###############################################################################
# Process checks.
#
#  Make sure mountd is running
proc mountd

#  Make sure there are no more than 4 ntalkds running, but 0 is ok too.
proc ntalkd 4

#  Make sure at least one sendmail, but less than or equal to 10 are
running.
proc sendmail 10 1


###############################################################################
# Executables/scripts
#

# a simple hello world
exec echotest /bin/echo hello world

###############################################################################
# disk checks
#

disk / 10000


###############################################################################
# load average checks
#

# Check for loads:
load 12 14 14


###############################################################################
# Extensible sections.
#



###############################################################################
# Pass through control.
#

###############################################################################
# Subagent control
#

master agentx
agentXperms 0660 0550 nobody asterisk
SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
mibs +ASTERISK-MIB

###############################################################################
# Further Information




2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>

> What operating system do You have ? What asterisk version You compile ?
> After install net-snmp do You recompile asterisk with res_snmp module ?
>
> I'm used instruction from here
> http://voxilla.com/2009/02/03/configuring-asterisk-snmp-support-1131
> and everything work correctly.
>
> BR,
> Michał
> W dniu 27 listopada 2009 11:18 użytkownik mickael ropars
> <mropars at gmail.com> napisał:
> > Hi Michal,
> >
> > thanks a lot for you quick answer I appreciate.
> >
> > I run your commands and I have the following answer
> >
> > [localhost snmp]# snmpwalk -c local -v 1 localhost asterisk
> > no answer
> >
> > [localhost snmp]# snmpwalk -c local -v 2c localhost asterisk
> > ASTERISK-MIB::asterisk = No Such Object available on this agent at this
> OID
> >
> >
> > since I don't know well snmp what's going wrong ?
> >
> > regards
> >
> > Mickael
> >
> >
> >
> > 2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>
> >>
> >> Hello Mickael
> >>
> >> Here You have the snmpd.conf file
> >>
> >> cat /etc/snmp/snmpd.conf
> >> rocommunity your_community
> >> master agentx
> >> agentXperms 0660 0550 nobody asterisk
> >> SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
> >> mibs +ASTERISK-MIB
> >>
> >> and also you need create file /etc/snmp/snmp.conf with following entry
> >> "mibs +ASTERISK-MIB"
> >>
> >> cat /etc/snmp/snmp.conf
> >> mibs +ASTERISK-MIB
> >>
> >> Next use command "snmpwalk -c your_community -v 1 localhost asterisk"
> >> to check is everything correct.
> >>
> >>
> >>
> >> Michał
> >>
> >> 2009/11/27 mickael ropars <mropars at gmail.com>:
> >> > Hi all,
> >> >
> >> > I am currently not able to configure SNMP for asterisk, but I am not
> >> > able to
> >> > acess to the asterisk MIB (the asterisk MIB is in
> /usr/share/snmp/mibs/)
> >> >
> >> >
> >> > Does somebody has an example of smnpd.conf file wich is working ?
> >> >
> >> > regards
> >> >
> >> > Mickael
> >> >
> >> > _______________________________________________
> >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> >
> >> > asterisk-users mailing list
> >> > To UNSUBSCRIBE or update options visit:
> >> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >
> >>
> >> _______________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091127/05d87c8b/attachment.htm 


More information about the asterisk-users mailing list