[asterisk-users] Setting outgoing callerid on when using a PRI

[Jon Moore]

Hi list.  I've googled around for this, and so far have come up short.

I'm attempting to set the outbound callerid when making a call using
our PRI.  I've talked with ATT (the providor) and they have said the
screening table has been disabled, so anything my phone system sends
for callerid should be passing along.  However, when I make a call,
the primary number assigned on our PRI is showing up, not the value
I've set.

Here is how I'm making the call...

exten => _91NXXNXXXXXX,1,Set(CALLERID(all)="Corner Homecare" <12703653903>)
exten => _91NXXNXXXXXX,2,Dial(DAHDI/G2/${EXTEN:1}})

I'll be glad to offer up any debugging information that you might
need, if it will help. I'm using Asterisk 1.6.0.14 and DAHDI 2.2.0.

TIA

-jonathan