[asterisk-users] zaptel installation

[Danny Nicholas]

Couple of things:

Does native zap dial work (exten => s,1,Dial(Zap/1) ) ?

You should put a w in front of the number (wait .5 seconds before
proceeding) and give the call at least 30 seconds to connect.

 

What do you get from zap show channels and zap show status?

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry Geis
Sent: Thursday, May 28, 2009 3:39 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] zaptel installation

 


  _____  

Probably not, otherwise incoming shouldn't work.  What are you doing for a
Dial command (exten => s,1,Dial(Zap/1,w5551212,60) )?
  

My dial command is a Zap/1/91317506XXXX for my cell.

It says attempting call...
unable to request channel Zap/1/91317506XXXX

I thought you could tell from the zttool command the signalling
and determine if its setup as em&m or FXS etc...

Jerry

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090528/8b663863/attachment.htm