[asterisk-users] Dialplan Priorities and Sort Order...

[M Hulber]

What you have here should work just fine except:

exten => _1866NXXXXXX,1,Dial(ZAP/g1/${EXTEN}) -- note the change from n to 1.

I also don't understand why you have an "Answer" after your Dial statements.

I would do this:


; Outbound via POTS
[general-outbound]

include => pri_outbound

exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
exten => _1800NXXXXXX,n,Busy
exten => _1800NXXXXXX,n,Hangup

exten => _1866NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
exten => _1866NXXXXXX,n,Busy
exten => _1866NXXXXXX,n,Hangup

exten => h,1,Hangup

; Outbound via PRI
[pri_outbound]
exten => _X.,1,Dial(ZAP/g0/${EXTEN})
exten => _X.,n,Busy
exten => _X.,n,Hangup

exten => h,1,Hangup

Tim Nelson wrote:
> Greetings!
>
> I'm hoping someone can help me with what should be the most basic of problems. Essentially, I want to have certain calls on an Asterisk 1.2.25 (Yes I know its old, upgrade, etc... its on my roadmap) install go out a couple of analog lines and all other calls go out a PRI. The analog lines are setup in Zaptel group 1 and the PRI channels are in Zaptel group 0. Here is my relevant config:
>
> ; Outbound via POTS
> [general-outbound]
> exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
> exten => _1800NXXXXXX,n,Answer
> exten => _1800NXXXXXX,n,Busy
> exten => _1800NXXXXXX,n,Hangup
> exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
> exten => _1866NXXXXXX,n,Answer
> exten => _1866NXXXXXX,n,Busy
> exten => _1866NXXXXXX,n,Hangup
> include => pri_outbound
>
> ; Outbound via PRI
> [pri_outbound]
> exten => _X.,101,Dial(ZAP/g0/${EXTEN})
> exten => _X.,102,Answer
> exten => _X.,103,Busy
> exten => _X.,104,Hangup
>
> I certainly cannot be the only one who wants this sort of setup... correct? Is it the way I'm including the other context, the dial patterns, the priorities, etc? I'm not opposed to combining it into a single context, I just started it out with this way. All hints are appreciated. (Pun intended.. :-) )
>
> --Tim
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   

-- 

MARK.

Hulber Technologies
asterisk-admin at hulber.com

Read my blog             :  http://mark.hulber.com
Follow @hulber on Twitter:  http://twitter.com/hulber