[asterisk-users] Queue Load, Asterisk Disconnected
Torintino T
torintino1 at hotmail.com
Sat May 16 03:37:16 CDT 2009
I have Asterisk 1.2.29, Zaptel 1.2.24 and Freepbx Setup for
a queue up to 15 agents through a PRI line, it was working fine for more than 1
year, suddenly, when there is a load on the queue, the asterisk service
disconnects and the calls are dropped. And the service starts again after few
seconds, and so on.
I am not using fax.
I checked PRI by zttool and there are no alarms.
The cdr logs
2195,2","","Busy","","2009-05-13
10:06:53",,"2009-05-13 10:06:55",2,0,"NO
ANSWER","DOCUMENTATION"
"","0225167604","237","from-internal","""0225167604""
<0225167604>","Local/237 at from-internal-a07f,2","","Busy","","2009-05-13
10:06:55",,"2009-05-13 10:06:57",2,0,"NO
ANSWER","DOCUMENTATION"
"","0225167604","229","from-internal","""0225167604""
<0225167604>","Local/229 at from-internal-c662,2","","Busy","","2009-05-13
10:06:57",,"2009-05-13 10:06:59",2,0,"NO
ANSWER","DOCUMENTATION"
"","0225167604","224","from-internal","""0225167604""
<0225167604>","Local/224 at from-internal-3a3a,2","","Busy","","2009-05-13
10:06:59",,"2009-05-13 10:07:00",1,0,"NO
ANSWER","DOCUMENTATION"
/usr/sbin/safe_asterisk: line 57: 14229 Segmentation fault (core dumped)
${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
cat: /var/run/asterisk.pid: No such file or directory
Automatically restarting Asterisk.
Verbosity logs:
-- Launched AGI Script
/var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090513-092729|1242196049.184: Inbound recording enabled.
recordingcheck|20090513-092729|1242196049.184: CALLFILENAME=1242196049.184
-- AGI Script recordingcheck completed, returning 0
-- Executing Monitor("Local/211 at from-internal-b759,2",
"wav49|1242196049.184| mb") in new stack
-- Executing Macro("Local/211 at from-internal-b759,2",
"dial|30|Ttr|211") in new stack
-- Executing AGI("Local/211 at from-internal-b759,2",
"dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
-- dialparties.agi: priority is 1
dialparties.agi: Caller ID name is '0227559600' number is '0227559600'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 211 to extension map
-- dialparties.agi: Extension 211 cf is disabled
dialparties.agi: Extension 211 has do not disturb enabled
-- AGI Script dialparties.agi completed, returning 0
-- Executing NoOp("Local/211 at from-internal-b759,2", "Returned
from dialparties with no extensions to call") in new stack
-- Executing Set("Local/211 at from-internal-b759,2",
"DIALSTATUS=BUSY") in new stack
-- Executing GotoIf("Local/211 at from-internal-b759,2",
"1?s-BUSY|1") in new stack
-- Goto (macro-exten-vm,s-BUSY,1)
-- Executing NoOp("Local/211 at from-internal-b759,2", "Extension
is reporting BUSY and has no Voicemail") in new stack
-- Executing Busy("Local/211 at from-internal-b759,2", "") in
new stack
-- Local/211 at from-internal-b759,1 is busy
== Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on
'Local/211 at from-internal-b759,2' in macro 'exten-vm'
== Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on
'Local/211 at from-internal-b759,2'
== Spawn extension (macro-dial, s, 10) exited non-zero on
'Local/225 at from-internal-6cb4,2' in macro 'dial'
== Spawn extension (macro-dial, s, 10) exited non-zero on
'Local/225 at from-internal-6cb4,2' in macro 'exten-vm'
== Spawn extension (macro-dial, s, 10) exited non-zero on
'Local/225 at from-internal-6cb4,2'
== Spawn extension (ext-queues, 100, 7) exited non-zero on 'Zap/25-1'
-- Hungup 'Zap/25-1'
-- Stopped music on hold on Zap/27-1
-- Playing periodic announcement
-- Playing 'custom/Busy' (language 'en')
-- Called Local/221 at from-internal/n
-- Executing Macro("Local/221 at from-internal-e5d7,2",
"exten-vm|novm|221") in new stack
-- Executing Macro("Local/221 at from-internal-e5d7,2",
"user-callerid") in new stack
-- Executing Set("Local/221 at from-internal-e5d7,2",
"AMPUSER=") in new stack
-- Executing GotoIf("Local/221 at from-internal-e5d7,2",
"0?109") in new stack
-- Executing Set("Local/221 at from-internal-e5d7,2",
"EMERGENCYCID=") in new stack
-- Executing Set("Local/221 at from-internal-e5d7,2",
"AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("Local/221 at from-internal-e5d7,2",
"1?7") in new stack
-- Goto (macro-user-callerid,s,7)
-- Executing NoOp("Local/221 at from-internal-e5d7,2", "Using
CallerID "0227559600" <0227559600>") in new stack
-- Executing Set("Local/221 at from-internal-e5d7,2",
"FROMCONTEXT=exten-vm") in new stack
-- Executing Macro("Local/221 at from-internal-e5d7,2",
"record-enable|221|IN") in new stack
-- Executing GotoIf("Local/221 at from-internal-e5d7,2", "0 >
0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("Local/221 at from-internal-e5d7,2",
"recordingcheck|20090513-092731|1242196051.186") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090513-092731|1242196051.186: Inbound recording enabled.
recordingcheck|20090513-092731|1242196051.186: CALLFILENAME=1242196051.186
-- AGI Script recordingcheck completed, returning 0
-- Executing Monitor("Local/221 at from-internal-e5d7,2",
"wav49|1242196051.186| mb") in new stack
-- Executing Macro("Local/221 at from-internal-e5d7,2",
"dial|30|Ttr|221") in new stack
-- Executing AGI("Local/221 at from-internal-e5d7,2",
"dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
-- dialparties.agi: priority is 1
dialparties.agi: Caller ID name is '0227559600' number is '0227559600'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 221 to extension map
-- dialparties.agi: Extension 221 cf is disabled
-- dialparties.agi: Extension 221 do not disturb is disabled
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
== Manager 'admin' logged off from 127.0.0.1
-- dialparties.agi: Checking CW and CFB status for extension 221
dialparties.agi: Extension 221 is not available to be called
dialparties.agi: Extension 221 has call waiting disabled
-- AGI Script dialparties.agi completed, returning 0
-- Executing NoOp("Local/221 at from-internal-e5d7,2", "Returned
from dialparties with no extensions to call") in new stack
-- Executing Set("Local/221 at from-internal-e5d7,2",
"DIALSTATUS=BUSY") in new stack
-- Executing GotoIf("Local/221 at from-internal-e5d7,2",
"1?s-BUSY|1") in new stack
-- Goto (macro-exten-vm,s-BUSY,1)
-- Executing NoOp("Local/221 at from-internal-e5d7,2", "Extension
is reporting BUSY and has no Voicemail") in new stack
-- Executing Busy("Local/221 at from-internal-e5d7,2", "") in
new stack
-- Local/221 at from-internal-e5d7,1 is busy
-- Called Local/225 at from-internal/n
== Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on
'Local/221 at from-internal-e5d7,2' in macro 'exten-vm'
== Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on
'Local/221 at from-internal-e5d7,2'
-- Executing Macro("Local/225 at from-internal-a118,2",
"exten-vm|novm|225") in new stack
-- Executing Macro("Local/225 at from-internal-a118,2",
"user-callerid") in new stack
-- Executing Set("Local/225 at from-internal-a118,2",
"AMPUSER=") in new stack
-- Executing GotoIf("Local/225 at from-internal-a118,2",
"0?109") in new stack
-- Executing Set("Local/225 at from-internal-a118,2",
"EMERGENCYCID=") in new stack
-- Executing Set("Local/225 at from-internal-a118,2",
"AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("Local/225 at from-internal-a118,2",
"1?7") in new stack
-- Goto (macro-user-callerid,s,7)
-- Executing NoOp("Local/225 at from-internal-a118,2", "Using
CallerID "0227559600" <0227559600>") in new stack
-- Executing Set("Local/225 at from-internal-a118,2",
"FROMCONTEXT=exten-vm") in new stack
-- Executing Macro("Local/225 at from-internal-a118,2",
"record-enable|225|IN") in new stack
-- Executing GotoIf("Local/225 at from-internal-a118,2", "0 >
0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("Local/225 at from-internal-a118,2",
"recordingcheck|20090513-092731|1242196051.188") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090513-092731|1242196051.188: Inbound recording enabled.
recordingcheck|20090513-092731|1242196051.188: CALLFILENAME=1242196051.188
-- AGI Script recordingcheck completed, returning 0
-- Executing Monitor("Local/225 at from-internal-a118,2",
"wav49|1242196051.188| mb") in new stack
-- Executing Macro("Local/225 at from-internal-a118,2",
"dial|30|Ttr|225") in new stack
-- Executing AGI("Local/225 at from-internal-a118,2",
"dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
-- dialparties.agi: priority is 1
dialparties.agi: Caller ID name is '0227559600' number is '0227559600'
dialparties.agi: Methodology of ring is 'none'
asterisk*CLI>
Disconnected from Asterisk server
Executing last minute cleanups
[root at asterisk ~]#
Any Help will be highly appreciatedThanks a lot.
Torintino
_________________________________________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy!
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090516/274bf2d3/attachment-0001.htm
More information about the asterisk-users
mailing list