[asterisk-users] Compact, fanless appliance?

[Tzafrir Cohen]

On Wed, May 06, 2009 at 08:28:54AM +0100, Gordon Henderson wrote:
> On Wed, 6 May 2009, Vincent wrote:
> 
> >On Mon, 4 May 2009 10:07:06 +0100 (BST), Gordon Henderson
> ><gordon+asterisk at drogon.net> wrote:
> >>Do you want to build your own?
> >>
> >>If so, you can put togther a 1GHz fanless VIA miniITX board, case (that
> >>will take a drive or flash IDE), memory and psu for well under £200. Same
> >>system has one PCI slot for a card that might take analogue, ISDN2 or
> >>ISDN30.
> >
> >Thanks for the tip. I'll see how much a complete VIA-based system
> >costs.
> 
> One little tip: You need to compile Asterisk for an i586 processor as the 
> VIA processor is missing a few (mmx, etc.) instructions that a full blown 
> i686 has.

Which VIA processor?

I don't think this applies to the C7 .

(And I'm not aware of any x86-compatible processor that is in real-life
usage now that has no MMX. Well, maybe some 486-s are still used
somewhere)

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir