[asterisk-users] [UK SPECIFIC] DAHDI and a OpenVox Card

[--[ UxBoD ]--]

----- "--[ UxBoD ]--" <uxbod at splatnix.net> wrote:

> ----- "Gordon Henderson" <gordon+asterisk at drogon.net> wrote: 
> > On Fri, 1 May 2009, --[ UxBoD ]-- wrote: 
> > 
> > > Gave those settings a try and still no joy :( I have managed to
> get rid 
> > > of the Red Alarm by changing the cable! But I still get :- 
> > > 
> > > == Starting post polarity CID detection on channel 1 
> > > -- Starting simple switch on 'DAHDI/1-1' 
> > > [May 1 08:59:04] WARNING[11653]: chan_dahdi.c:7311 ss_thread: CID
> timed out waiting for ring. Exiting simple switch 
> > > -- Hungup 'DAHDI/1-1' 
> > > 
> > > This is so annoying :( 
> > 
> > I see those overnight when BT does a line test. 
> > 
> > Only think I could suggest is to drop back to 1.2 with Zaptel &
> oslec. 
> > I've a multitude of boxes runing that with no problems at all with
> no 
> > plans to upgrade to dhadi for now. 
> > 
> > Gordon 
> > 
> > _______________________________________________ 
> > 
> Okay, getting somewhere now ! I am now getting the following :-
> 
> == Starting post polarity CID detection on channel 1
>     -- Starting simple switch on 'DAHDI/1-1'
> [May  1 12:03:10] NOTICE[4360]: chan_dahdi.c:7669 ss_thread: MWI:
> Channel 1 message waiting!
>     -- Executing [s at inbound-dahdi:1] Answer("DAHDI/1-1", "") in new
> stack
>     -- Executing [s at inbound-dahdi:2] Ringing("DAHDI/1-1", "") in new
> stack
>     -- Executing [s at inbound-dahdi:3] Wait("DAHDI/1-1", "1") in new
> stack
>     -- Executing [s at inbound-dahdi:4] Playback("DAHDI/1-1",
> "home-message") in new stack
>     -- <DAHDI/1-1> Playing 'home-message.gsm' (language 'en')
>     -- Executing [s at inbound-dahdi:5] Hangup("DAHDI/1-1", "") in new
> stack
>   == Spawn extension (inbound-dahdi, s, 5) exited non-zero on
> 'DAHDI/1-1'
>     -- Hungup 'DAHDI/1-1'
> 
> The problem is that I never actually here the message playback.  On
> the dialling phone I just hear it keep ringing.  My test dialplan is
> as follows :-
> 
> [inbound-dahdi]
> exten => s,1,Answer()
> exten => s,n,Ringing()
> exten => s,n,Wait(1)
> exten => s,n,Playback(home-message)
> exten => s,n,Hangup()
> 
> Any ideas please ?
> 

Well just cannot get this to work :( DAHDI will not pick up the call at all ... Tried just about every combination and it will never work :(:(

Best Regards,

-- 
SplatNIX IT Services :: Innovation through collaboration