[asterisk-users] Newbie trying to make calls outside via digium card and POTS line

[Alex Robar]

On Mon, Mar 30, 2009 at 5:16 PM, Bruce Thayre <bruce at mipscomputation.com>wrote:

>
> Up to this point, all i have set up are two SIP phones, my POTS phone,
> and 1 ring group.  My POTS line is connected to channel 1, and my POTS
> phone is connected on channel 3.  Perhaps my understanding of how the
> calls are handled is flawed, but it seems to me that:
>
> 1.  I dial a number on my POTS phone
> 2.  Using the number, asterisk should match it against the dialing rules
> i have set
> 3.  Having matched the number to an outbound dialing rule, it routes the
> call to the outside trunk and bingo bango i'm talking on the phone with
> someone outside my office
>
> However in this situation, it doesn't seem to work.  And lines like
> "[18585300400 at from-internal:6] Congestion("Zap/3-1", "20") in new stack"
> are a mystery to me.  If any additional information is needed just let
> me know what, and i'll post it.  Any help would be greatly appreciated
> as i'm kind of stuck on at this point.  Thanks!!!!
>
> <http://lists.digium.com/mailman/listinfo/asterisk-users>



Hi Bruce,

I can't be sure without looking at your dialplan, but based on your
description it looks like you are routing calls out the wrong port. Asterisk
is trying to dial 1-858-530-0400 on port 3 of your Digium card. You've
stated that your POTS line is plugged into port 1, so there's likely an
error in your dial command. Do you have Dial(ZAP/3-1... instead of
Dial(ZAP/1-1... ?

AR

-- 
Alex Robar
alex.robar at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090330/dd9a5a91/attachment.htm