[asterisk-users] PBX to gate interface

[Andrew Thomas]

Have a look at http://www.northsupply.co.uk/ (under Door Access
Systems).

	
 	  	
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
Mason (Lists)
Sent: 18 March 2009 11:56
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PBX to gate interface

How does a Push-to-talk intercom interface with Asterisk?



Andrew Thomas wrote:
> There are various ways of doing this.
>
> You could use an analogue port/ATA and connect any good old fashioned
> intercom to it (Pantel are a good make).
>
> You can now get SIP intercom systems as well.  I haven't tried on of
> these - but they look good (and can contain a camera as well if
needed).
>
> HTH
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
> Mason (Lists)
> Sent: 17 March 2009 13:23
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] PBX to gate interface
>
> Has anyone found a good wayt o do a gate intercom using Asterisk? I am

> looking at a Xorcom PBX with programmable contact, so I have no issue 
> with opening the gate, but the interface at the gate is a bit tricky.
I 
> thought about a weather proof housing containing a phone but it seems
a 
> bit tacky. I also looked at a handsfree erather proof phone, but at
$600
>
> it is a bit steep. Any solutions that have been implemented
> successfully?
>
>   


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users