[asterisk-users] PBX to gate interface

[Andrew Thomas]

There are various ways of doing this.

You could use an analogue port/ATA and connect any good old fashioned
intercom to it (Pantel are a good make).

You can now get SIP intercom systems as well.  I haven't tried on of
these - but they look good (and can contain a camera as well if needed).

HTH

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
Mason (Lists)
Sent: 17 March 2009 13:23
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] PBX to gate interface

Has anyone found a good wayt o do a gate intercom using Asterisk? I am 
looking at a Xorcom PBX with programmable contact, so I have no issue 
with opening the gate, but the interface at the gate is a bit tricky. I 
thought about a weather proof housing containing a phone but it seems a 
bit tacky. I also looked at a handsfree erather proof phone, but at $600

it is a bit steep. Any solutions that have been implemented
successfully?

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users