[asterisk-users] configuring channels for dahdi

[Aqua Man]

[channels]
usecallerid=yes
callerid=asreceived
cidsignalling=bell
hidecallerid=no
callwaiting=yes
musiconhold=default
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=400
rxgain=0.0
txgain=0.0
signalling=fxo_ks
language=en
context=default
channel => 1
signalling=fxs_ks
channel => 4

I used same settings from zapata.conf.  This worked fine before the dahdi.  Any help would much appreciated



> Date: Tue, 10 Mar 2009 14:46:44 +0000
> From: andy at datavox.co.uk
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] configuring channels for dahdi
> 
> Post up your chan_dahdi.conf and we'll fix it :)
> 
> Hint - you are missing : 'signalling = fxo_ks' and 'signalling = fxs_ks' from it. 
> 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aqua Man
> Sent: 10 March 2009 14:21
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] configuring channels for dahdi
> 
> after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following: 
> 
> signalling must be specified before any channels are. 
> 
> CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling 
> Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1' 
> Error[4663]: chan_dahdi.c:11970 reload: Reload of chan_dahdi.so is unsuccessful! 
> 
> 
> NOTICE[4641]: loader.c:580 ast_module_reload: The module 'chan_dahdi.so' was not properly initialized. Before reloading the module, you must run 'module load chan_dahdi.so' and fix whatever is preventing the module from being initialized. 
> 
> dahdi_cfg -vvv 
> 
> dahdi version: 2.1.0.4 
> Echo Canceller(s): mg2 
> Configuration 
> 
> Channel map: 
> 
> channel 01: fxo kewlstart (Default) (Echo Canceler: mg2) (Slaves:01) 
> channel 04: fxs kewlstart (Default) (Echo Canceler: mg2) (Slaves:04) 
> 
> 2 channels to configure. 
> 
> setting echocan for channel 1 to mg2 
> setting echocan for channel 4 to mg2 
> 
> sudo cat /proc/dahdi/* 
> Span 1: wctdm/4 'wildcard tdm400p rev I board 5' (master) 
> 
> 1 wctdm/4/0 fxoks (ec: mg2) 
> 2 wctdm/4/1 
> 3 wctdm/4/2 
> 4 wctdm/4/3/ fxsks (ec:mg2) 
> 
> dahdi_hardware -v 
> pci:0000:00:06.0 wctdm+ e159:0001 wildcard tdm400p rev I 
> 
> ls -l /usr/lib/asterisk/modules/chan_dahdiso 
> -rwx-xr-x 1 root root /usr/lib/asterisk/modules/chan_dahdi.so 
> 
> signalling must be specified before any channels are error[4641] 
> 
> 
> core show channels location State Application(Data) 
> 0 active channels 
> 0 active calls 
> 
> any advice?
> 
> 
> There is no dialtone for the tdm400p card but the lights are activated on the card for ports 1 & 4
> 
> Windows Live(tm) Groups: Create an online spot for your favorite groups to meet. Check it out.
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_________________________________________________________________
Windows Live™ Groups: Create an online spot for your favorite groups to meet.
http://windowslive.com/online/groups?ocid=TXT_TAGLM_WL_groups_032009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090310/87b0f179/attachment.htm