[asterisk-users] configuring channels for dahdi

[Dave Fullerton]

Aqua Man wrote:
> after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI>  module load chan_dahdi.so receive the following:
> 
> 
> 
> 
> 
> signalling must be specified before any channels are.
> 
> 
> 
> 
> 
> CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
> 
> 
>      Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
> 
> 
>      Error[4663]: chan_dahdi.c:11970 reload: Reload of chan_dahdi.so is unsuccessful!
> 
> 
> 
> 
> 
> 
> 
> 
> NOTICE[4641]: loader.c:580 ast_module_reload: The module
> 'chan_dahdi.so' was not properly initialized. Before reloading the
> module, you must run 'module load chan_dahdi.so' and fix whatever is
> preventing the module from being initialized.
> 
> 
> 
> 
> 
> dahdi_cfg -vvv
> 
> 
> 
> 
> 
> dahdi version: 2.1.0.4
> 
> 
> Echo Canceller(s): mg2
> 
> 
> Configuration
> 
> 
> 
> 
> 
> Channel map:
> 
> 
> 
> 
> 
> channel 01: fxo kewlstart (Default) (Echo Canceler: mg2) (Slaves:01)
> 
> 
> channel 04: fxs kewlstart (Default) (Echo Canceler: mg2) (Slaves:04)
> 
> 
> 
<snip>

What are the contents of chan_dahdi.conf in /etc/asterisk? Did you 
specify what signalling to use there?


-Dave