[asterisk-users] Sangoma A200

[Rob Hillis]

Yes, although not for connecting to the PSTN - I've used one for
connecting to a legacy NEC PABX.

Voltage isn't the issue - the difference is in the impedance.  Australia
uses complex impedance (220+820Ohm resistors with a 120nF capacitor)
whereas the US uses a straight resistor.

Alex Samad wrote:
> Hi
>
> I was wondering if any one has used these cards, I am looking at this as
> a replacement for the tdm410, I have some issues with installing the
> tdm410 in a small case because of the power plug being at the end of the
> board.
>
> I am in australia seems like we have a different setup for out fxs
> voltage, any one in oz using this card ?
>
> Thanks
> Alex
>
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users