[asterisk-users] Help building dahdi for debian

Tzafrir Cohen tzafrir.cohen at xorcom.com
Tue Jun 16 08:06:12 CDT 2009


On Tue, Jun 16, 2009 at 02:35:08PM +0300, Tzafrir Cohen wrote:
> On Tue, Jun 16, 2009 at 09:04:37PM +1000, Alex Samad wrote:
> > On Sun, Jun 14, 2009 at 06:28:09AM +0300, Tzafrir Cohen wrote:
> > 
> > [snip]
> > 
> > > > Although I think I did see it download the firmware 
> > > 
> > > The scripts for downloading the post-build firmware were moved to the
> > > separate dahdi-firmware package (sadly it has not made it into the
> > > archive yet). As the firmware files are not distributable I ended up
> > > just including the firmwares/ directory . That package is intended for
> > > non-free anyway (it includes the xpp firmwares)
> > > 
> > > I included a script in that package to download and install the digium
> > > firmwares (a glorified make -C).
> > > 
> > >   /usr/share/dahdi/get-digium-firmware
> > 
> > Hi
> > 
> > I have downloaded
> > http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-vpmadt032-1.07.tar.gz
> > and placed it in /usr/share/dadhi (un tarred )
> > 
> > when I reload the wctdm24xxp module I see
> > [ 3350.588717] Found a Wildcard TDM: Wildcard TDM410P (4 modules)
> > [ 3375.529165] Freed a Wildcard
> > [ 3428.201978] Boosting ringer on slot 1 (89V peak)
> > [ 3428.202059] Port 1: Installed -- AUTO FXS/DPO
> > [ 3433.358455] Boosting ringer on slot 2 (89V peak)
> > [ 3433.358474] Port 2: Installed -- AUTO FXS/DPO
> > [ 3433.597478] Port 3: Not installed
> > [ 3434.139532] Port 4: Installed -- AUTO FXO (AUSTRALIA mode)
> > [ 3434.160522] VPM100: Not Present
> > [ 3442.191181] Booting VPMADT032
> > [ 3446.075609] VPMADT032: Present and operational (Firmware version 117)
> > 
> > but when I run dahdi_genconf it use the opensource echo canceller !
> 
> dahdi_genconf generates configuration. It is a tool intended to help you
> and not a required step.
> 
> It defaults to using mg2[1]. You can tell it to use a different echo
> canceller in the configuration it generates by setting 'echo_can hpec'
> in /etc/dahdi/genconf_parameters

Duh. Ignore this. You asked about the hardware EC. The hardware EC can
be activated regadrdless of the software EC you use.

(Not sure exactly how. Anybody?)

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir



More information about the asterisk-users mailing list