[asterisk-users] Polycom Spectralink 8002 WiFi Phones

[Cesar Gonzalez]

Has anyone played with this phone? i cant seem to get it to work 
properly, i manged to get it registered and can make calls from it, but 
i havent been able to make it receive calls. Weird thing its that if you 
make a call from it and while you are on that call you dial its number 
does calls go thru in second line, but as soon as you terminate both 
calls it wont recieve any calls again.

Heres a look from the asterisk CLI :

-- Registered SIP '245' at 192.168.0.239 port 5060 expires 60
trixbox1*CLI> sip show peer 245
trixbox1*CLI>

Name : 245
Secret : Set
MD5Secret : Not set
Context : from-internal
Subscr.Cont. : Not set
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 245 at device
VM Extension : *97
LastMsgsSent : 32767/65535
Call limit : 50
Dynamic : Yes
Callerid : "device" <245>
MaxCallBR : 384 kbps
Expire : 67
Insecure : no
Nat : RFC3581
ACL : No
T38 pt UDPTL : No
CanReinvite : No
PromiscRedir : No
User=Phone : No
Video Support: Yes
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
LastMsg : 0
ToHost :
Addr->IP : 192.168.0.239 Port 5060
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: 245
SIP Options : (none)
Codecs : 0x4 (ulaw)
Codec Order : (ulaw:20)
Auto-Framing: No
Status : OK (124 ms)
Useragent : Slnk/12
Reg. Contact : sip:245 at 192.168.0.239:5060

But after a few seconds the Status goes to UNKNOWN :

Auto-Framing: No
Status : UNKNOWN <<------
Useragent : Slnk/12
Reg. Contact : sip:245 at 192.168.0.239:5060

This are the config files :

sip_245.cfg
AUTH = 245; 123456
LINE1 = 245
LINE1_PROXY = 1
LINE1_CALLID = Wireless
LINE1_AUTH = 245; 123456
LINE2 = 245
LINE2_PROXY = 1
LINE2_CALLID = Wireless
LINE2_AUTH = 245; 123456

sip_allusers.cfg
CODECS = g711u, g711a
PROXY1_TYPE = Asterisk
PROXY1_ADDR = 192.168.0.253:5060
#PROXY1_KEYPRESS_2833 = enable
PROXY1_KEYPRESS_INFO = disable
PROXY1_HOLD_IP0 = disable
#PROXY1_PRACK = enable
PROXY1_REREG_SECS=3600
PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = 192.168.0.253
PROXY1_CALLID_PER_LINE = disable
PROXY1_MAIL_ACCESS = *97

Access Points are Ubiquitki NanoStation 2 in WDS Mode with QoS enabled.

One last thing is that while you're on a call you can ping the phone and 
soon as the call ends phone stops pinging.

Any Ideas?
Thanks