[asterisk-users] Video Call

[Ron]

hi sir

yes you're correct, voice call works from 100 to 200-202 but not video call.

on my iax i simply added:

videosupport=yes

allow=h264
allow=h263

TIA

Ron



Danny Nicholas wrote:
> To clarify, you have users 100, 101, and 102 on server 1 and 200, 201, and
> 202 on server 2.  100 can VC 101 and 102, but not 200-202.  100 can make a
> voice call to 200-202.  Have you checked your iax.conf to make sure all
> codecs are functional?
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ron
> Sent: Friday, July 10, 2009 8:39 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Video Call
> 
> Hi,
> 
> I have 2 asterisk servers link via IAX. and i'm trying to do a video call.
> 
> if 2 sip users are registered on the same server, the video works fine.
> but if 1 sip user is on server 1 and sip user 2 on sip server 2. there's 
> no video at all. is it because call from sip server 1 goes to sip server 
> 2 via IAX?
> 
> hope my question is clear enough, thanks in advanced
> 
> Ron
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>