[asterisk-users] Some IAX calls do not disconnect.

[Rajkumar S]

On Fri, Jul 3, 2009 at 12:36 PM, Tim Panton<thp at westhawk.co.uk> wrote:
> I'd try adding
> transfer=no
> in the B iax.conf

This does not help, I still have some ghost calls in B

a16-in1*CLI> core show channels
Channel              Location             State   Application(Data)
IAX2/a16-in1-sangoma (None)               Up      AppDial((Outgoing Line))
IAX2/a16-in1-12174   outbound at inbound-cal Up      Dial(iax2/a16-in1-sangoma-flip
IAX2/a16-in1-sangoma (None)               Up      AppDial((Outgoing Line))
IAX2/a16-in1-7161    outbound at inbound-cal Up      Dial(iax2/a16-in1-sangoma-flip
IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
IAX2/a16-in1-14813   s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
IAX2/a16-in1-4485    s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
IAX2/a16-in1-10115   s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
10 active channels
5 active calls

raj