[asterisk-users] Auto Detect

[bails]

Probably not much use to you in this instance, but its always nice to 
know that lspci -v prints the kernel driver in use and kernel modules.

e.g.

10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M 
Gigabit Ethernet PCI Express (rev 02)
	Subsystem: Hewlett-Packard Company Device 30c2
	Flags: bus master, fast devsel, latency 0, IRQ 220
	Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

Bails

David @ULC wrote:
>  lspci
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev
> 03)
> 00:02.0 VGA compatible controller: Intel Corporation 82G35 Express
> Integrated Graphics Controller (rev 03)
> 00:02.1 Display controller: Intel Corporation 82G35 Express Integrated
> Graphics Controller (rev 03)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
> Connection (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Contoller #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controller #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> Controller #2 (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> Controller (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 1 (rev 02)
> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 2 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
> 3 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> Controller #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> Controller #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
> Controller (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA
> IDE Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
> 02)
> 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA
> IDE Controller (rev 02)
> 03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
> 04:03.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
> Adapter (rev 11) (rev 11)
> 04:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
> 
> 
> but
> 
> *service network restart RETURNS me*
> 
> **>>* Shutting down interface eth0: [ OK ]*>>* Shutting down loopback
> interface: [ OK ]*>>* Bringing up loopback interface: [ OK ]*>>*
> Bringing up interface eth0: [ OK ]*>>* Bringing up interface eth1:
> skge device eth1 does not seem to be present,*>>* delaying
> initialization.*>>* [FAILED]*
> 
> 
> 
> 
> On Mon, Jan 26, 2009 at 5:24 PM, David @ULC <ucoms2001 at gmail.com> wrote:
> 
>> Which command to run which will auto detect all hardwares present in the
>> system ?
>> OS : CentOS
>> Running Asterisk
>>
>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.