[asterisk-users] Odd Read App Issues

[Brent Davidson]

Robert Broyles wrote:
> Okay. I'm using this all over SIP Trunking with Vitelity.
> Any other suggestions?
> --
> Regards,
> Robert Broyles
>
>   
>
>
> Eric Wieling, Asteria Solutions Group wrote:
>> Robert Broyles wrote:
>>   
>>> So I'm using the READ() application within an IVR, and having a strange 
>>> issue, and wondering if anyone else has had this problem.
>>>
>>> When calling from an outside line, and entering the digits during the 
>>> read() part of my dialplan, it's accepting some of the digits twice, 
>>> though it's only keyed in once.
>>>
>>> When testing the dialplan internally, it accepts only the digits that I 
>>> key in.
>>>
>>> Anyone else experienced this?
>>>     
>>
>> Yes.  Most of the time it is either because I put relaxdtmf=yes in 
>> zapata.conf or because my rxgain is too low on that port.
>>
>>     
I've seen an issue similar to this when the sip peer was providing DTMF 
over multiple encodings at the same time.  Usually, it's when Asterisk 
is expecting DTMF via inband, but the peer is sending inband and either 
INFO or rfc2833.  What do you have the dtmfmode= line set to in your 
sip.conf?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090226/3b85538e/attachment.htm