[asterisk-users] Configuring chan_dahdi.conf for Sangoma A200/Remora FXO/FXS Analog AFT card

[John Novack]

What does Sangoma have to say?
They have, in the past, given excellent support and their cards have a 5 
year warranty.

Best try there first.

John Novack



Ketema Harris wrote:
> Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ 
> FXS Analog AFT card set up properly.
>
> The main issue is that the card has four ports and as far as I can  
> tell Asterisk is only seeing two.  On the two that it recognizes the  
> "Green" FXS ports are not green, they just are not lit.  The "RED" FXO  
> ports are indeed red, but from what I have read your not supposed to  
> plug the analog phone into those.  So from my standpoint its not  
> "working"  below is some more info about my system.  Any help would be  
> appreciated.
>
> I am running the following:
>
> http://wiki.sangoma.com/sangoma-hardware#A200
>
> Asterisk 1.6.0.5
> dahdi-linux-2.1.0.4
> dahdi-tools-2.1.0.2
> wanpipe-3.3.15.20
> linux kernel 2.6.27
>
> The card is detected, but I can only get two channels configured.   
> Here is my chan_dahdi.conf
>
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> progzone=us
> tonezone=0
> jbenable=yes
>
> ;Sangoma AFT-A200 [slot:4 bus:5 span:1]  <wanpipe1>
> context=default
> group=0
> echocancel=yes
> signalling=fxs_ks
> channel => 1
>
> context=default
> group=0
> echocancel=yes
> signalling=fxs_ks
> channel => 2
>
> dahdi show version
> DAHDI Version: 2.1.0.4 Echo Canceller: MG2
>
> dahdi show status
> Description                              Alarms  IRQ    bpviol CRC4    
> Fra Codi Options  LBO
> wrtdm Board 1                            OK      0      0      0       
> CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)
>
> dahdi show channels
>     Chan Extension  Context         Language   MOH Interpret         
> Blocked    State
>   pseudo            from-zaptel                 
> default                         In Service
>        1            default                     
> default                         In Service
>        2            default                     
> default                         In Service
>
> Whenever asterisk starts or chan_dahdi.so is reloaded I get the  
> following:
>
> [Feb 24 15:23:41] WARNING[10206]: chan_dahdi.c:14304 process_dahdi:  
> Ignoring signalling at line 38.
>      -- Reconfigured channel 1, FXS Kewlstart signalling
> [Feb 24 15:23:41] WARNING[10206]: chan_dahdi.c:14304 process_dahdi:  
> Ignoring signalling at line 44.
>      -- Reconfigured channel 2, FXS Kewlstart signalling
>
> My goal is:
>
> 1) Get Dialtone for my analog phone.
> 2) Be able to send and make calls from my analog phone
> 3) Be able to receive and send faxes from my fax machine
>
> My service provider is VOIP, so I will never be getting or sending  
> calls from/to the traditional telco.  But I do believe I should be  
> able to send and receive calls from this device out to my SIP provider.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   

-- 
Dog is my co-pilot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090224/ed6f2561/attachment.htm