[asterisk-users] PRI Test Lab

Lee Wilson leefm40 at yahoo.co.uk
Fri Feb 13 04:39:27 CST 2009


Hey Gordon,

I was probably going with the Openvox anyway because they were cheaper. 

As this is just a hobby, no live environment I wanted to move away from just playing with SIP/IAX and get proper channels setup.

I was inspired by any earlier test I did at my last company where I was able to get a Cisco BRI Router working though the Asterisk PBX using BRIStuff. When I get it going, I'll try to document the setup in case anyone is interested.

Cheers

Lee


--- On Fri, 13/2/09, Gordon Henderson <gordon at drogon.net> wrote:

> From: Gordon Henderson <gordon at drogon.net>
> Subject: Re: [asterisk-users] PRI Test Lab
> To: "Lee Wilson" <leefm40 at yahoo.co.uk>
> Date: Friday, 13 February, 2009, 10:18 AM
> On Fri, 13 Feb 2009, Lee Wilson wrote:
> 
> > I just want to clarify before I got and buy anything
> the cards are not so cheap.
> 
> Hi Lee,
> 
> I'm assuming you're in the UK from your yahoo
> address (I'm in the UK too)
> 
> I've installed a few boxes with these cards:
> 
>  
> http://www.voipon.co.uk/openvox-d110p-pci-isdn-pri-card-p-658.html
> 
> Not had any real issues with them and they're a bit
> cheaper than the digium cards.
> 
> (I've never used one as a clock master though - did
> consider doing what you're doing before my first ISDN30
> install, but decided that as enough people were using them
> and saying that they worked, that it should "just
> work" and it did).
> 
> Regards,
> 
> Gordon
> -- www.drogon.net


      




More information about the asterisk-users mailing list