[asterisk-users] Minimum version for asterisk and iaxmodem

[James Lamanna]

So I got 1.2.31 compiled but I still can't do a loopback fax with
IAXModem, Hylafax and Asterisk.
The call connects, but the iaxmodem log fills up with "Adjusting skew
xxx" and the fax ultimately
fails with:

Feb 07 14:10:26.05: [ 3497]: MODEM No carrier
Feb 07 14:10:26.05: [ 3497]: Failure to receive silence
(synchronization failure). {E100}
Feb 07 14:10:26.05: [ 3497]: RECV FAX: Failure to receive silence
(synchronization failure). {E100}
Feb 07 14:10:26.05: [ 3497]: RECV FAX: end
Feb 07 14:10:26.05: [ 3497]: Failure to receive silence
(synchronization failure). {E100}
Feb 07 14:10:26.05: [ 3497]: SESSION END

 -- Accepting AUTHENTICATED call from 127.0.0.1:
       > requested format = ulaw,
       > requested prefs = (),
       > actual format = ulaw,
       > host prefs = (ulaw),
       > priority = mine
    -- Executing Dial("IAX2/iaxmodem0-11201",
"IAX2/iaxmodem1/xxxxxxxxxx|60") in new stack
    -- Called iaxmodem1/6266053472
    -- Call accepted by 127.0.0.1 (format ulaw)
    -- Format for call is ulaw
    -- IAX2/iaxmodem1-1796 is ringing
    -- IAX2/iaxmodem1-1796 answered IAX2/iaxmodem0-11201
    -- Attempting native bridge of IAX2/iaxmodem0-11201 and IAX2/iaxmodem1-1796




On Sat, Feb 7, 2009 at 1:44 PM, James Lamanna <jlamanna at gmail.com> wrote:
> On Sat, Feb 7, 2009 at 1:19 PM, Lee Howard <faxguy at howardsilvan.com> wrote:
>> James Lamanna wrote:
>>>
>>> Hi,
>>> I'm trying to use iaxmodem against a very old version of asterisk
>>> (1.0.7 - its a debian sarge embedded system),
>>> yet when asterisk gets a call from iaxmodem, it says that the "format
>>> for the call is unknown".
>>> Does anyone know if there is a minimum version of asterisk that is
>>> compatible with iaxmodem 1.1.0?
>>
>> I originally developed IAXmodem while using Asterisk 1.2.x.  I have since
>> migrated to Asterisk 1.4.x.  I never attempted to use Asterisk 1.0.x with
>> IAXmodem, and I have also never tried Asterisk 1.6.x (although I suspect
>> others have without issue).
>
> Thanks Lee.
> I'm compiling 1.2.31 right now to see if I have more luck (1.4.x is
> giving me trouble w/
> iaxmodem + hylafax on this ARM platform, but it works great on x86!).
>
>>
>> Thanks,
>>
>> Lee.
>>
>
> -- James
>