[asterisk-users] E1 R2 Congestion Status

[Moises Silva]

On Tue, Dec 22, 2009 at 9:08 AM, Khaled W Chehab <kchehab at xplorium.com>wrote:

>   I have a 'CONGESTION' Status with R2 protocol.
>
> While testing this scenario     sip GW--àAsterisk –Digium E1 R2 ProtocolàCisco
> E1 R2 protocolàsip Gw
>
> Find below my error and configuration ,where are the errors in my
> configuration ?
>

Typically you will be better off in the asterisk-r2 mailing list. Your
message is more easily spotted by R2 people.

First thing is to check you have green status in your E1, do you? and make
sure you have the right clock settings, I never configured a cisco but it
seems you configured the cisco to be a slave and I don't see any port in
DAHDI system.conf with master clock settings. (span=1,0,0...etc)

After that, enable R2 call logging using mfcr2_call_files=yes and pastebin
the generated call file (if any), if no file is generated it means the
problem is not at R2 but in your local trunk settings (may be dialing in the
wrong group or something).

-- 
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091222/12a39cad/attachment.htm