[asterisk-users] Starting and installing Dahdi (2.2.0)?

Vincent vincent.delporte at bigfoot.com
Tue Dec 8 07:28:09 CST 2009


It looks like "make config" takes care of installing an init script,
so I can just run "/etc/init.d/dahdi start to load the required
modules.

I get the following error, however:
-----------
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
  wcfxo:  [  OK  ]

Running dahdi_cfg:  DAHDI_CHANCONFIG failed on channel 1: No such
device or address (6)
[FAILED]
-----------

FWIW, the PCI card seems to be correctly detected:
-----------
# lspci -v

03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
        Subsystem: Unknown device b100:0003
        Flags: bus master, medium devsel, latency 64, IRQ 12
        I/O ports at a000 [size=256]
        Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
-----------

Here's /etc/dahdi/system.conf:
-----------
loadzone=fr
defaultzone=fr
fxsks=1
-----------

Any idea what is wrong?

Thank you.




More information about the asterisk-users mailing list