[asterisk-users] TE4XXP: Version Synchronization Error!

[Joao Gomes Pereira]

Im also getting these errors:




Aug 26 17:58:17 catumbela kernel: dahdi: Registered tone zone 0 (United 
States / North America)
Aug 26 17:58:17 catumbela kernel: About to enter startup!
Aug 26 17:58:17 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:17 catumbela last message repeated 127 times
Aug 26 17:58:17 catumbela kernel: TE4XXP: Span 1 configured for CAS/HDB3
Aug 26 17:58:17 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:17 catumbela last message repeated 11 times
Aug 26 17:58:17 catumbela dahdi: Running dahdi_cfg:  succeeded
Aug 26 17:58:18 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:18 catumbela last message repeated 21 times
Aug 26 17:58:18 catumbela kernel: wct4xxp: Setting yellow alarm on span 1
Aug 26 17:58:16 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:16 catumbela last message repeated 67 times
Aug 26 17:58:16 catumbela kernel: SPAN 1: Primary Sync Source
Aug 26 17:58:16 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:16 catumbela last message repeated 2 times
Aug 26 17:58:16 catumbela kernel: VPM400: Not Present
Aug 26 17:58:16 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:16 catumbela last message repeated 37 times
Aug 26 17:58:16 catumbela kernel: VPM450: Not Present
Aug 26 17:58:16 catumbela kernel: TE4XXP: Version Synchronization Error!
Aug 26 17:58:16 catumbela kernel: Completed startup!
Aug 26 17:58:16 catumbela kernel: TE4XXP: Version Synchronization Error!




What could be worng with my dahdi  configuration?
Thanks
regards
Joao Pereira




Joao Gomes Pereira escreveu:
> Hello to all
> I'm using asterisk 1.4 and dahdi.
> I had everything working fine, and I could place calls through my R2 
> channel.
> But now the channel is always "RED" and Im getting this error message:
> 
> TE4XXP: Version Synchronization Error!
> 
> 
> Here is my chan_dahdi.conf------------------------------
> 
> 
> [channels]
> language=en
> context=incomingr2
> 
> signalling=mfcr2
> 
> mfcr2_variant=ar
> 
> 
> switchtype=national
> 
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=9
> mfcr2_category=national_subscriber
> 
> channel =>1-15,17-30
> 
> here is my dahdi config: --------------------
> 
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-30:1101
> dchan=16
> 
> -------------------------------------------
> 
> What could be the problem?
> Why was this working fine and now the channel is RED?
> 
> Thanks
> Regards
> Joao Pereira
> 
> 

-- 
StarTel - A Rede Livre
Joao Gomes Pereira
www.startel.pt
+351 304500650
sip: gomespereira at startel.pt