[asterisk-users] dahdi_scan doesn't recognize an OpenVox A400E

Tzafrir Cohen tzafrir.cohen at xorcom.com
Tue Aug 4 03:57:47 CDT 2009


On Tue, Aug 04, 2009 at 10:40:15AM +0200, Joan Antoni Terre wrote:
> Hi everybody,
> 
> 
> 
> In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a
> Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize
> the OpenVox. This card was working correctly but suddenly stopped working
> and I cannot make it work again. Both “lspci” and “dahdi_hardware” detect it
> but “dahdi_scan” not and I cannot use it.
> 
> 
> 
> >lsppci:
> 
> *0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface*
> 
> 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01)
> 
> 
> 
> > dahdi_hardware:
> 
> pci:0000:0a:00.0     wctdm-       e159:0001 Wildcard TDM400P REV E/F
> pci:0000:11:00.0     wcb4xxp+     d161:b410 Digium Wildcard B410P
> 
> 
> 
> As you can see, it seems that wctdm driver is not loaded  (minus sign beside
> wctdm) but if I restart dahdi, it loads it correctly:
> 
> Loading DAHDI hardware modules:
>   wctdm:                                                   [  OK  ]
>   wcb4xxp:                                                 [  OK  ]
> 
> Running dahdi_cfg:                                         [  OK  ]
> 

The module load. That does not mean it has detected any device. I
suppose that the output of dahdi_hardware will be as before.

As to the question of why the card was not picked up by that module:
that's a good question. Maybe you need to contact the support of the
vendor of the card (But what do I know about PCI cards, anyway? ;-) )

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir



More information about the asterisk-users mailing list