[asterisk-users] CDR feature not working properly for "failed call attempt"

[C. Savinovich]

As far as I know, just reinstall 1.4.20, and your problem goes away.

 

CS

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vikas
Sent: Wednesday, April 22, 2009 4:12 AM
To: asterisk-users at lists.digium.com; asterisk-dev at lists.digium.com
Subject: [asterisk-users] CDR feature not working properly for "failed call
attempt"

 

Hi Asterisk Developers/users, 
I am facing a problem while using the cdr feature of asterisk(version
asterisk1.4.24.1). Whenever I make a call using a "*.call" file and it gets
failed , it don't produce the CDR for that channel as it falls into
"OutgoingSpoolFailed" channel As there is no such channel defined for
"OutgoingSpoolfailed".. I am using this line in extension.conf for capturing
the failed atempt: 

exten => failed,1,Set(CDR(userfield)=${HANGUPCAUSE}) 


I did a bit of googling and found that this problem is coming out with
Asterisk1.14.24 and it was quite OK in 1.4.17. 

http://forums.digium.com/viewtopic.php?t=64832
<http://forums.digium.com/viewtopic.php?t=64832&highlight=outgoingspoolfaile
d> &highlight=outgoingspoolfailed 

It seems to be bug with this new release , can any developer look into this
or give any workaround so for this feature to work in failed cases also.

Best Regards,
Parveen Jain

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090422/97c31874/attachment.htm